Factory price stainless steel 2b finish ss 304 201 403 stainless steel sheet

 

 

	Factory price stainless steel 2b finish ss 304 201 403 stainless steel sheet
Material	Monel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy,stainless steel
Shape	Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet
Grade	Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L
	Others: 253Ma,254SMo,654SMo,F50(UNS S32100)F60,F61,F65,1J22,N4,N6 etc
	Alloy : Alloy 20/28/31;
	Hastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;
	Hastelloy B / UNS N10001,Hastelloy B-2 / UNS N10665 /  DIN W. Nr. 2.4617,Hastelloy C,Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602,Hastelloy C-276 /  UNS N10276 / DIN W. Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665
	Haynes: Haynes 230/556/188;
	Inconel Series:
	Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20;
	Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06601 / DIN W. Nr. 2.4851, Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07725,Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel 600 / UNS N06600 / DIN W. Nr. 2.4816
	Incoloy: Incoloy 800/800H/800HT/825/925/926;
	GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044
	Monel: Monel 400/K500/R405
	Nitronic: Nitronic 40/50/60;
	Nimonic: Nimonic 75/80A/90/A263 ;
Specification	Wire: 0.01-10mm Strip: 0.05*5.0-5.0*250mm  Bar: φ4-50mm;Length 2000-5000mm Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm
Product  Characteristics	1.According to the preparation process can be divided into deformation superalloys,  casting superalloys and powder metallurgy superalloys. 2.According to the strengthening mode, there are solid solution strengthening type, precipitation  strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc..
Standard	GB,AISI,ASTM,DIN,EN,SUS,UNS etc
Inspection	ISO,SGS,BV and so on.
Application	High temperature components such as turbine blades, guide vanes, turbine disks, high pressure  compressor disks,machine manufacturing and combustion chambers used in the manufacture of aviation, naval and industrial gas turbines
Packaging	1. cases packed in wooden cases 2. paper packaging 3. plastic packing 4. foam packaging Packaging according to customer requirements or products
Delivery	7-25days or according to the product
Payment	L/C,D/A,D/P,T/T,Western Union,MoneyGram,According to customer requirements payments for offline orders.

CHEMICAL COMPOSITION:

Element	Type 201
Carbon	0.15x
Manganese	5.5 – 7.5
Sulfur	0.03X
Phosphorus	0.060x
Silicon	1.0 x
Chromium	16 – 18
Nickel	3.5 -5.5
Nitrogen	0.25x

MECHANICAL PROPERTIES:

Type	Yield Strength 0.2% offset (KSI)	Tensile Strength (KSI)	% Elongation (2″ Gauge length)
201 Ann	38 min.	75 min.	40% min.
201 ¼ Hard	75 min.	125 min.	25.0 min.
201 ½ Hard	110 min.	150 min.	18.0 min.
201 ¾ Hard	135 min.	175 min.	12.0 min.
201 Full Hard	145 min.	185 min.	9.0 min.

PHYSICAL PROPERTIES:

Density (lb./ in^2) @ RT		0.283
Modulus of Elasticity in Tension (psi x 10^6)		28.6
Specific Heat (BTU/o F/lb.)	32 to 212 oF	0.12
Thermal Conductivity (BTU/hr/ft^2/ft)	212oF	9.4
Mean Coefficient of Thermal Expansion (in. x 10^-6 per o F)	32 to 212oF	8.7
	32 to 600oF	9.7
	32 to 1,000oF	10.2
Electrical Resistivity (micro ohms – cm)	at 70oF	69
Melting Point Range (oF)		2550/2650
Oxidation Resistance – Continuous Service(oF)		1550
Oxidation Resistance – Intermittent Service(oF)		1500

PROCESSING:

The annealing temperature for Type 201 is between 1850-2000°F. Rapid cooling through the carbide precipitation range (1500 – 800 o F) is necessary to keep the carbides in solution and prevent sensitization. Type 201 is not hardenable by thermal treatment; it is only hardenable by cold working.

 

 

Stainless Steel Pipe/Tube	Stainless Steel Sheet/Plate/Coil	Stainless Steel Bar
Inconel Alloy	Nickel Alloy	Special Steel