Round Bar, buy Steel Company 42CrMO4 SCM440 CK45 1045 S45C C45 Tool Carbon Forged Steel Round Bar on China Suppliers Mobile

Product Details

Product Description

Steel Company 42CrMO4 SCM440 CK45 1045 S45C C45 Tool Carbon Forged Steel Round Bar

Steel Bar is divided into three types: hot rolled, forged and cold drawn.Hot-rolled bar steel is 5 to 250 mm, of which 5 to 9 mm is commonly used as a raw material for drawing steel wires,which is called wire;Forged bar steel has a large diameter and is used as a shaft blank;Cold-drawn bar steel has a diameter of 3 to 100mm and has high dimensional accuracy. Steel bar is mostly used as a semi-finished raw material for various deep-processed steels, and has a wide range of uses.

Standard	JIS ASTM GB EN AISI
Size	Diameter:16-250mm	Length:4000-15000mm
Technique	Hot Rolled / Cold Rolled / Forged
Package	Export Standard Package,bundled or be required
Service	Cutting Service , Customized Fabrication Service

<Steel round bar pictures display:

<Steel round bar category,grades,sizes and standard :

Category	Grades	Sizes	Standard
Carbon structure steel	Q195, Q215, Q235, Q275	16-250mm	GB/T700-2006
Low alloy high strength structure steel	Q295, Q345, Q390, Q420,Q460	16-250mm	GB/T1591-2008
Prime Carbon structure steel	10#, 20#, 35#, 45#, 60#, 20Mn,65Mn, B2, B3, JM20, SH45,S45C, C45	16-250mm	GB/T699-1999
Alloy structure steel	30Mn2,40Mn2,27SiMn,42Crmo,20Cr, 40Cr,20CrMo,35CrMo,20CrMnTi, 30CrMnTi,20MnVB,20MnTiB,20CrNiMo,Q345B,35MnBM,40MnB,36Mn2V,45MnV	16-250mm	GB/T3077-1999
Spring Steel	65Mn, 60Si2Mn, 50CrVA	16-250mm	GB/T1222-84
Bearing Steel	GCr15, GCr15GD,55SiMoV	16-250mm	GB/T18254-2002
Structural steels subject to end-quench hardenability requirements	20CrMnTi,30CrMnTi,20Cr,40Cr,30CrMo, 42CrMoA,27SiMn,40Mn2H,20CrNiMo, 40Mn2,q345b,35MnBM,40MnB,45MnV	16-250mm	GB/T5216-2004
Oil wells structural steel	37Mn5, 36Mn2V	16-250mm	Q/LYS248-2007
Marine anchor chain steel	CM490, CM690, M30Mn2	16-250mm	YB/T66-1987 GB/T18669-2002

Production Process

Round Bar Processing Service

We can do machining, truning, drill according to drawings. Turning is a process of machining bars to a desired size. By having material Rough Turned, the removal of the bars surface layer generally eliminates decarburization, seams, slivers and other surface imperfections. The value of material can be increased by removing such surface defects. The finished bar can be machined with relative freedom from warpage.Because the surface layer is removed, turned bars are especially well suited for induction hardening. Rough turned bars may be polished following machining, leaving a smooth shiny surface.

Steel Rod Threaded Rod Process

First:doing heat treatment Q+T for hot rolled round bars to make sure the rods to reach the hardness as required.

Second:doing UT to test the rods after heat treatment.
Third:making turning for the rods by machining.
Forth:making thread on the bright smooth rods.
Fifth:making the nuts match the thread rods.

Package&Delivery

1.By bundles,each bundle weight under 3 tons,for small outer diameter round bar,each bundles with 4 - 8 steel strips

2.20 feet container contains dimension,length under 6000mm

3.40 feet container contains dimension,length under 12000mm

4.By bulk vessel,freight charge is low by bulk cargo,and large heavy sizes can not loaded into containers can shipping by bulk cargo

<Steel round bar packing and shipping diaplay:

Packaged with water-proof cloth to prevent scratching

Professional transportation team trucking cargo to port

Loading cargo by crane ready for shipment

Company Profile

Tianjin Emerson Commercial and Trade Co.,Ltd located in Tianjin, China, providing construction materials: steel plate, steel sheet, steel coil, steel pipe, steel rod, steel beam, steel channel, angle bar, and hollow sections. Except these products, we also supply steel structure construction, scaffolding, steel formwork, machinery, and fabrication service, and provide purchasing service for foreign companies purchasing in China. We do OEM. We cut steel coils into steel sheet cutting to length line, or cut steel coils into steel strips with small width. We cut steel plate by flame cutting, laser cutting, water jet cutting to all shapes as clients’ drawings; we welding, bending, make plates into steel structure, machine parts and make machines. We bend steel pipes, cut and weld the pipes into steel structure parts, make all by clients’ drawings. We do Quenched and Tempered heat treatment for steel rod and round bar.

<Certificate:

<Factory:

<Our Service:

1. 24h online service,feedback in 1 hour,quotation can be send in 30 minutes

2. Good quality products, and provide product inspection certificate

3. Customized service,supply customized processing according to your requirments

4. Standard packaging and shipping,provide packing by customers'need and fast delivery

5. After sale service,we will help to solve problems you have after the transaction is over

Service wins the future, we do prime quality, fast delivery, and good service, welcome everyone cooperate with us. Waiting you!

Other Products

We can also supply many other steel products,steel coil,steel rod,square tube,stainless steel sheet,steel square rod,steel coil,gi sheet,steel structure,deformed bar and many steel process products.

We can also provide steel products customized processing service,we can do cutting, forging,stamping,punching,forming etc processing methods,can supply products according to your needs.

(Click the picture below to know more details if you interested in the products)