SU304 Sheet Stainless Steel 304 Plate
Product Description
Specification
Specifications:Thickness :
Cold rolled(0.3mm-6.0mm); Hot rolled:(3.0mm - 130mm)
Width : 1000mm/1219mm/1250mm/1500mm/1800mm/2000mm or as needed
Length : 1000mm/2000mm/2440mm/3000mm/6000mm/12000mm or as needed.
Common number | ASTM | Mechinical Spefication | ||||
Rm Mpa | Y.S.(Mpa) | A5 | ||||
201 | 201 | ≥520 | ≥275 | ≥40 | ||
1Cr17Ni7 | ≥520 | ≥205 | ≥40 | |||
301 | 301 | ≥520 | ≥205 | ≥40 | ||
1Cr18Ni9 | ≥520 | ≥205 | ≥40 | |||
0Cr18Ni9 | ≥520 | ≥205 | ≥40 | |||
304 | 304 | ≥515 | ≥205 | ≥30 | ||
00Cr19Ni10 | ≥480 | ≥175 | ≥40 | |||
304L | 304L | ≥485 | ≥170 | ≥30 | ||
309S | 309S | ≥520 | ≥205 | ≥40 | ||
0Cr25Ni20 | ≥520 | ≥205 | ≥40 | |||
310S | 310S | ≥520 | ≥205 | ≥40 | ||
0Cr17Ni12Mo2 | ≥520 | ≥205 | ≥40 | |||
316 | 316 | ≥515 | ≥205 | ≥30 | ||
00Cr17Ni14Mo2 | ≥480 | ≥175 | ≥40 | |||
316L | 316L | ≥485 | ≥170 | ≥30 | ||
316Ti | 316Ti | ≥515 | ≥205 | ≥30 | ||
0Cr19Ni13Mo3 | ≥520 | ≥205 | ≥40 | |||
00Cr19Ni13Mo3 | ≥480 | ≥177 | ≥40 | |||
317L | 317L | ≥480 | ≥176 | ≥40 | ||
0Cr18Ni10Ti | ≥520 | ≥205 | ≥40 | |||
321 | 321 | ≥515 | ≥205 | ≥30 | ||
409L | ≥360 | ≥175 | ≥25 | |||
410 | 410 | ≥440 | ≥205 | ≥20 | ||
430 | 430 | ≥450 | ≥205 | ≥22 | ||
444 | 444 | ≥480 | ≥310 | ≥30 | ||
410S | ≥420 | ≥290 | ≥33 | |||
2205/S31803/F51 | 2205 | ≥450 | ≥620 | ≥15 | ||
2507/S32750/F53 | 2507 | ≥550 | ≥800 | ≥25 | ||
630 | ≥520 | ≥785 | ≥18 | |||
904L/N08904 | ≥490 | ≥216 | ≥35 | |||
304 304l Stainless steel maintenance:
Regular cleaning and maintenance
Pay attention to prevent the occurrence of the phenomenon of surface scratches
Use soap, weak detergent or warm water to remove surface dust, dirt
In addition to the surface of the binder with alcohol or an organic solvent (ether, benzene)Use neutral detergent or ammonia solution in addition to surface oil
With 10% nitric acid or abrasive detergent in addition to the surface of the embroider caused by the dirt.
Surface service:
Application:
1: Chemical industry: Equipment, industrial tanks and etc.
2: Medical instruments: Surgical instruments, surgical implants and etc.
3: Architectural purpose: Cladding, handrails, elevator, escalators, door and window fittings, street furniture,
structural sections, enforcement bar, lighting columns, lintels, masonry supports, interior exterior decoration for building, milk or food processing facilities and etc.
structural sections, enforcement bar, lighting columns, lintels, masonry supports, interior exterior decoration for building, milk or food processing facilities and etc.
4: Transportation: Exhaust system, car trim/grilles, road tankers, ship containers, refuse vehicles and etc.
5: Kitchen Ware: Tableware, kitchen utensil, kitchen ware, kitchen wall, food trucks, freezers and etc.
6: Oil and Gas: Platform accommodation, cable trays, sub-sea pipelines and etc.
7: Food and Drink: Catering equipment, brewing, distilling, food processing and etc.
8: Water: Water and sewage treatment, water tubing, hot water tanks and etc.And other related industry or construction field.
With all kinds of processing, NC flame, plasma, laser and water jet cutting, drilling, punching,welding, bending, etc.
hot rolled mirror finished 300 series stainless steel plate
We can supply other stainless steel products, like stainless steel sheet, stainless steel pipe, u tube, H beam, flat bar, and so on.
We can also provide you with the following services:
1. Unscreen-rolling of steel coils and flattening into steel plates
2. Steel coil is divided into strip and steel strip.
3, split into small steel coil
Packing & Delivery
1. wood pallet packing cover with water-proof paper
2. steel pallet packing cover with water-proof paper
3. wood box packing
4. steel pallet packing cover with steel box
5. in bundles with steel strip no extra packing
when stainless steel sheet thickness is over 12mm, each standard plate weight is almost 1 ton, so when the surface is common pickled surface, not make mirror surface orbrushed hairline surface, it no needs special packing, wood pallet will be ok.
when the stainless steel sheet are cut by laser cutting or water-jet cutting to be machine parts, it needs to be packed very carefully to make sure the parts not be scraped, the surface need to be packed with thick plastic anti-collision film to make sure it in safe condition.
Company Profile
Tianjin Emerson Commercial and Trade Co.,Ltd mainly provides steel plate, steel sheet, steel pipe,seamless steel pipe and tube, round bars and steel section, and doing steel products processing service: steel plate and sheet processing service. The processing works concludes cutting the larger plate into the small sizes customer demand, cut by drawing, cut to special sizes, weld the cut parts by drawing, also make galvanizing processing or surface painting on the final processed parts; steel pipe hollow bar cutting and lathe processing to make the outer diameter and wall thickness to meet customers requirement, also make heat treatment for hollow bars and pipes. Tianjin Emerson Commercial and Trade Co.,Ltd has large stocks for the carbon steel and low alloy steel plates and sheets, especially have the thick plate and heavy plates on stock, also can provide the special material and large size steel plates, boiler and pressure vessel steel plate, marine steel plate, hot rolled steel plate for new production.
*1.Feedback: Any enquiry and comments will be feedback within 12 hours by email.
*2.Fast delivery,Guarantee.
*3.Common material stock available,we can also cuatomize product special material.
*4.Shipping photo: Shall offer the product photoes after loading into container.
*5.Payment term: Both TT and L/C are acceptable.
*6.Documents: Offer all the relvant professional documents on time.
*7.Service: Give the feedback services after the buyer received the products by email.
*7.Service: Give the feedback services after the buyer received the products by email.
FAQ
Q: Will you accept the customized and OEM product?
A: Yes, we can do the production based on your drawings and with your logo; also
because we have very strong design and development team, so the feedback is very good for customized product.
because we have very strong design and development team, so the feedback is very good for customized product.
Q: How about the MOQ? If my first order qty is small, will you accept?
A: We would like to do our best to support your trial order qty, so even 1 pc or 1kg is ok to start cooperation; because we have confidence to move on second order with your esteemed company.
Q: What is your payment terms ?
A: Commonly two payment term for new customers:
1) 30% T/T as deposit , 70% balance against B/L copy;
2) 100% Irrevocable L/C at sight;
If you need any other terms, pls feel free to contact us too, we will try our best.
BACK TO HOME