Product Description

Standard	Grade	C max	Mn max	Si max	P	S	N	Cu	Yield strength max	Tensile strength	Elongation%
EN10025	S235JR	0.22	1.50	---	0.045	0.045	0.014	0.60	175Mpa	340-510 Mpa	17
EN10025	S235J0	0.19	1.50	---	0.040	0.040	0.014	0.60	175Mpa	340-510 Mpa	19
EN10025	S235J2	0.19	1.50	---	0.035	0.035	0.014	0.60	165Mpa	340-510 Mpa	19
EN10025	S275JR	0.25	1.60	---	0.045	0.045	0.014	0.60	205Mpa	330-510	19
EN10025	S275J0	0.21	1.60	---	0.040	0.040	0.014	0.60	205	380-540	19
EN10025	S275J2	0.21	1.60	---	0.035	0.035	---	0.60	195	380-540	19
EN10025	S355JR	0.27	1.70	0.60	0.045	0.045	0.014	0.60	275	450-680	22
EN10025	S355J0	0.24	1.70	0.60	0.045	0.045	0.014	0.60	265	450-680	22
EN10025	S355J2	0.22	1.70	0.55	0.045	0.045	0.014	0.60	255	450-680	22

 

Material	S235JR S275 S355
Thickness	8mm-600mm
Width	1500mm-4200mm
Length	6000mm-18000mm
Delivery condition	Hot rolled, controlled rolled, or normalized
Cutting service	Large steel plate cut to flat plate sizes, or cut to any size by drawing
Deep processing	After cutting large plate into the general sizes by drawing, milling and grinding, and make angles, polishing, and make special parts

Detail Images

 

 

 

 

 

Our Factory

 

 

 

 

 

 

About Deep Processing

High strength of steel plate bullet proof vest steel plate favorable price steel s235

  We can cut the large steel plates by your requirements, but to the width and length your demand; we can make the surface of the cut steel plate to be bright by miling and grinding, also can make holes and make angle degrees,and can weld by your drawing.

  For the thickness under 30mm, we mainly cut by laser cutting;for thickness over 30mm, mainly OXY-cut, flame cutting.

  For the thickness 200mm steel plate, because during the flame cutting, the temperature is very high, so the cutting parts steel plate might be broken at the angle part, then our workers will repair the angles to be good condition.

 Our Company

Tianjin Emerson Commercial and Trade Co.,Ltd located in Baodi District, Tianjin, China, mainly provide stock steel plate and sheet and processed steel plate. The processing plates conclude cutting the larger plate into the small sizes customer demand, cut by drawing, cut to special sizes, weld the cut parts by drawing, also make galvanizing processing or surface painting on the   final processed parts. Having large stocks for the carbon steel and low alloy steel plates and sheets, especially have the thick plate and heavy plates on stock, also can provide the special material and large size steel plates, boiler and pressure vessel steel plate, marine steel plate, hot rolled steel plate for new production. Also has hollow bars, thick wall seamless pipes and tubes on stock. Tianjin Emerson Commercial and Trade Co.,Ltd can provide good service for customer, good quality products, fast delivery, and after-sale service, Tianjin Emerson hopes to build good cooperation with everyone interested.

 

If you are interested in our PRODUCTS, please feel free to contact me.