Product Details

Glass beads 40 microns for needle polishing

Glass beads blasting media from HAIXU Abrasive was made from glass sand which crushed by glass blocks and plate glass, fused by high temperature in the electric furnace.

Long bead life Glass beads blasting media HAIXU Abrasive can be safe compared to other blast media. In particular, glass bead blast media can be a good alternative to silica sand depending on your application, which while silica sand is still legal it is becoming more regulated and is recognized as a source of a variety of health problems including silicosis.

Glass beads 40 microns for needle polishing Technical datasheet:

TYPICAL CHEMICAL ANALYSIS		TYPICAL PHYSICAL PROPERTIES
SiO2	71.0%	Hardness:	Mohs:6-7 HRC:46
NaO2	14.0%	Specific Gravity:	2.5 g/cm3
Fe2O3	0.1%	Bulk density(LPD):	1.6 g/cm3
Al2O3	2.0%	Refractive Index(RI)	≥1.5
MgO	4.0%	Round rate	≥80.0%
CaO	7.0%	Magnetic content	Black
Magnetic content	≤0.1%	Particle appearance:	colorless ,glass transparent without impurities,Round and smooth
Others	0.016

Specification for Glass beads 40 microns for needle polishing:

GB NO.	Mesh(U.S. standard)	BEAD SIZE RANGE (Dia. um)	BEAD SIZE RANGE (Dia. Inch)
GB NO.3	20-30	850-600	0.0331-0.0234
GB NO.4	30-40	600-425	0.0234-0.0165
GB NO.5	40-50	425-300	0.0165-0.0117
GB NO.6	50-70	300-212	0.0177-0.0083
GB NO.7	60-80	250-180	0.0098-0.0070
GB NO.8	70-100	212-150	0.0083-0.0059
GB NO.9	80-120	180-125	0.0070-0.0049
GB NO.10	100-170	150-90	0.0059-0.0035
GB NO.11	120-200	125-75	0.0049-0.0029
GB NO.12	140-230	106-63	0.0041-0.0025
GB NO.13	170-325	90-45	0.0035-0.0017

Related application of Glass beads 40 microns for needle polishing:

Long bead life Glass beads blasting media from HAIXU Abrasive is the common uses for glass bead blasting. Glass bead blasting is well suited for use in sandblasting cabinets where blast media will be recovered. It is effective at cleaning a surface without leaving much of a blast profile. This makes it ideal for cleaning paint or coatings off a part as well as the removal of rust. If a profile is needed though blast media like steel grit or aluminum oxide can be required as glass bead typically doesn’t profile when blasting.

We are a manufacturer, which can control the cost easier than trade company also can give you answer more quickly.

As a manufacturer, we know much in technique and can give you more support in technique problem

Professional and experienced service team, specialized in abrasive production, more than 10 years.

Our products are complete in specifications with various of sizes

We enjoys a good reputation in the customers in domestic and overseas markets.

Large production capacity, short lead time of products.

24*7 online service.