Automatic Rubber Foam Sponge Horizontal Vertical Cutting Machine

 

 

 

This cutting machine can cut sheet material like silicon rubber, foam, etc. The finished products are squares and rectangles. The length and width can be set freely.

 

Here a working video for your reference:  https://youtu.be/0PLQAh6U0GI

 

 

 

 

 If you are not sure if your material can be cut by this machine, plz consult us and provide following information:

Material
Roll material or sheet material
Max. material thickness
Max. material width(before cutting)
Max. material length(before cutting)
Min. width you want to cut(after cutting)
Min. length you want to cut(after cutting)

 

 

 

 Parameters:

Model	HX-360X+Y
Voltage	220V/380V
Power	750W
N.W.	220kg
G.W.	240kg
Cutting Length	0.1~9999.9mm
Cutting Width	1~360mm
Measurement	840x910x1150mm

 

 

 Machine Features:

1. Max material width: 360mm;
2. Tolerance: 0.05mm, Precision: 0.1mm;
3. Material thickness range: 0.5mm-15mm;
4. Both kiss cut and complete cut for sheet material are available;

5. This rubber cutting machine employs human-machine interface and PLC system;

6. This rubber cutting machine adopts a servo motor to make sure accuracy;

7. This rubber cutting machine can preset length, speed, and quantity, and will memorize them when it runs next time;

8. There are two working steps of this rubber cutting machine: firstly, cut the sheet material on the platform, then pull out the platform and rotate 90 degrees. The finished products are small blocks.

9. Cutting length and width are of high accuracy;
10. Operation is easy with a touch screen;
11. Waste rate is low.