Die Cutting Machine, buy Latest Model Adhesive Textile Tape Sticker Die Cutting Machine on China Suppliers Mobile

Product Details

high speed automatic rotary die cutting machine for film labels

Specifications
Item	Quantity
Slitting station	1 set
Rotary die cutting station	1 set
3" inflatable unwinding shaft(OD can be customized)	1pc
3" inflatable rewinding shaft(OD can be customized)	2pcs
Length counting/piece counting	1pc
EPC photo cell	2pcs
Slitting knife	8sets
Magnetic brake	1pc
Magnetic clutch	2pcs

Main Technical Parameters:

Specifications
Model	HX-320C	HX-420C
Slitting speed	75m/min	75m/min
Die cutting speed	70m/min	70m/min
Max web width	320mm	420mm
Max.unwinding dia.	500mm	500mm
inding dia.	480mm	480mm
Die Cutting length	178-470mm	178-470mm
Overall Diameter	1.32x1.02x1.52m	1.32x1.12x1.52m

1.Rotary die cutting station

This station is used for rotary die cutting ,it need install the magnetic cylinder together with flexible die ,

so it can die cut .

2.Magnetic cylinder and flexible die

This is optional parts , it should be customized based on your products .the girth of magnetic cylinder can be range from

1748-470mm . Flexible die should be made according to your drawings .

3.Slitting unit

Name: Slitting blades
Material : SKD-51
Original: Japan maetrial
This machine is standard equipped with 8 sets of slitting blades , The minimum slitting width is 20mm .

4.Material unwinding air shaft

Material unwinding air shaft for automatic blank label rotary die cutting machine ,it supports a simple material roll with

light weight .better less than 40KG ,this shaft is connected with EPC system ,it can move left or right to keep material

at straight line

5.EPC photo cell

This machine is equipped with two sets of photo cells . It can sensor the edge of roll material ,make sure the material

goes in straight line into die cutting station .

6.Discharge waste roller

This machine is equipped with dischage waste roller with motor .

The speed and power is adjustable ,and discharge direction is changeable too .It's easy to discharge the waste material .

7.Control panel

You can control every functions in this control panel , the length ,piece quantity ,tension of each shaft ,die cutting speed ,

EPC system ,etc . It's convenient for workers to operate the machine .

8.Magnetic tension control

All the shafts for unwinder and rewinder are magnetic tension brake and clutch .

It's easy to control the tension at control panel .

9.Discharge waste air blower

This air blower is for trimming the edge of finished rolls . When slitting ,you need trim the edge by slitting blade ,and the waste

can be blow out of the machine by this air blower .

Features:

Certifications