Electric Paper Thin Blade Slitter Die Cutting Creasing Machine

 

Ø This machine is an improvement to process in originally foundation.With nin-shaft design to diversify its function and purpose , simplify the operation and shorten the time required for the change of single adjustable.

Ø It provided with worm-gear box regulation to have a more accurate depth of paper press .The blade part is driven by independent gear and adjusted by ratchet wrench . It is also equipped with ruler to shorten the time required for blade adjustment.

Ø Blade sharpening is under auto-adjustable and full-electric control , with time set automatically according to the condition of production and selection for semi-automatic and full-antomatic operation.

Ø The unit includes paper feeding, slitting pre-press and creasing, with lower paper roller, to meet the requrements of different cartons on slitting and creasing.

Ø The shield is lifted by pneumatic rod . If the shield is opened , the general power supply of the machine is cut off and the alarm lamp and the operation indicator inside the shield light on to provide sufficient lighting at night.

 

 

 

Bulk(length,width,height)mm	2200*700*1300
Feeding width(mm)	2000
Blade amount	Four blade or client demand
Impression nip amount	Six lines or client demand
The minimum slitting width(mm)	120
The minimum slitting length(mm)	450
The minimumcreasing width(mm)	40
Slitting paper ply(mm)	1-12
Feeding speed(mm)	150m/min
Blade diameter(mm)	260
Air pressure	0.2mpa
Power(kw)	4kw
Weight(t)	2.5t