Environment Testing Chamber, buy Large Xenon Lamp Accelerated Weathering Environment Aging Test Equipment Machine on China Suppliers Mobile

Product Details

Product Description

Large Xenon Lamp Accelerated Weathering Environment Aging Test Equipment Machine

Introduction:
Xenon lamp aging tester is a test device for comprehensive environmental climate simulation machine, it can not only do the aging test, but also do the polymer material anti-ling test, that is polymer material expose to the simulate light, which simulated by artificial light fluorescent spectra, light through the glass. It simulate the light, temperature, rainfall or condensation and humidity, the several main climatic factors, and strengthen the climate to do the test, it use the whole spectrum of sunlight xenon arc lamp light to simulate the destructive wave in different environments; it is apply to the selection and improvement of new material, evaluation of existing materials or durability test of compound materials .

Standards:
ISO 105-B02/B04/B06, 4892-2, 11341, AATCC TM16, TM169, JIS L0843, GMW 3414
Note: this tester can conform to but not limit to all the standards above, for more standards conformance, please contact us.

Main functions:
It use to test the material by explore the material at controlling high temperature, light and rain cycle environment. It used
xenon lamp to simulate the solar light irradiation, use the condensation and spray rain to simulate the rainfall. The tester only need a few days or few weeks to simulate the aging test while in the natural environment it needs a few months or years, including fade, color change, rupture, crack, wrinkle, foaming, embrittlement, strength reduction, oxidation and etc.

Specification

Inner size(cm):D×W×H			50×60×50
Temperature range			RT+10℃~80℃
Performance specification	Humidity range	30~98%R.H(adjustable)
		Rain falling time	0~9999min (adjustable)
		Rain falling period	1~240minutes,interval(break),adjustable
		Spectral wavelength	300nm~400nm(0.55w/m²)
		Light source	Full spectrum xenon lamp
		Xenon lamp total power	1KW(air cooling), 6KW(air cooling),(lifetime:1200hours)
Temperature and humidity control system	Time Controller	Imported programmable time computer integrated controller
		Accuracy range	Setting accuracy: temperature ±0.1℃,humidity±1%R.H, Indicate accuracy:temperature,±0.1℃,humidity,±1%R.H
		Temperature Humidity Sensor	PTR Platinum Resistance,PT100Ω/MV
		Heating system	autonomous system,nichrome electric heating heater
		Humidification System	isolated type, SUS steel surface evaporative humidifier.
		Blackboard temperature	thermometal blackboard thermometer 55℃~75℃
		Water supply system	Automatic control for humidification system, recycling water for xenon lamp cooling.
		Temperature controller	Imported microcomputer temperature humidity integration controller
		Cyclic system	low noise,air-condition type motor, multiple-pin Centrifugal rotor
Material	Outside chamber material	SUS304 stainless steel.
		Inner chamber material	SUS304 stainless steel plate
		Sample shelf material	SUS304 stainless steel plate
		Doorframe heat insulation	good heat and cold resistance, aging silicone rubber door and sealing strips
		Standard configuration	non-browning glass observing window 1pcs,rack shelf 1 set, xenon lamp 1pcs
	Safeguard protection	leakage,short circuit,over temperature,short of water,motor overheating, over-current protection, Backup data for power fail
Voltage power			AC380V±10% 50±0.5Hz 3 phase 5 lines
Using temperature			5℃~+30℃≤85%R.H
Testing standards			ASTM G 155-04a, ASTM G 151, SAE J2527,GB/T2423.24-1995 GB/T16422.2 GB9344 GB/T1865-97

Company Profile

Packing & Delivery

FAQ

1.Are your company a trading one or a factory ?
Factory + trade (integration),18 years focusing on test instruments field,12 years exporting experience.

2.How to choose the most suitable products?
Our professional team will give you the best suggestion as long as you tell us what kind of test you need to do and the required specification.

3.What’s the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider making special arrangement for you.

4.Do you accept customization service?
Yes, of course, we can not only offer standard machines, but also customized machines according to your request. Don’t hesitate to tell us your requirement, we will try our best to meet your needs.

5.Can we visit your factory before order?
Yes, we warmly welcome and sincerely invite you or your team to visit our factory, we will help to arrange hotel and pick up you from airport.

6.Do you have customers of our country before?
Now our testing machines have been sold to more than 70 countries, like USA, Canada, Russia,UK, Italy, Germany, European Union, India, Pakistan, Philippines, Singapore, Thailand, Vietnam, Brazil and so on.

7.How about your warranty?
Generally, our warranty is one year. Within the warranty period, we can offer technique support and part parts change, necessarily, our engineers may go to your place for better service.

8.How about the packing for machine, is it safely protected during transportation?
Our machine is packed by standard export wooden box, it won’t be damaged. We’ve delivered many testing machines abroad by sea or by air without damage.

9.What is the order process?
Inquiry - quotation - communication - order confirming - deposit payment - production - testing and debugging - balance payment - packing - delivery - customer receiving - after service.

10.How to install and use the product?
The product is shipped with an operating instructions and video of English version.

If you want get more details ,or can not find out what are you looking for,pls feel free to contact me,i will do my best for you.