BS EN 61386-1:2008 impact test device

 

Low-Temperature Impact Test Device is compliance with standard requirement of IEC60245, IEC60227, IEC60540, GB5013-2008, GB5023-2008 and GBT2951-2008. It’s used to test all kinds of PVC sheathed cable, wire, soft wire and no sheath of parallel soft PVC insulated impact resistance at low temperature.

 

Technical parameters :

Parameters/Model	W-188-1	W-188-3
Working station	Single station	3 working stations
Weight of the drop hammer g	1000±2 and 100±1	100,200,300,400,500,600,750,1000,1250,1500
The height of the drop impact mm	100	100
Acier steel	Φ20,Bottom end arc:R300,100g	Φ20,Bottom end arc:R300,100g
Corresponding standards and applicable scope	IEC60884-1 clause 24.4,figure 27; IEC60884-1 clause 30.4,figure 42:	IEC60811-1-4:,IEC60811-1-14
Release mode	Manual, mechanical release	Manual, mechanical release

  

 

 

 

  

 

1.After an order is placed, when will you send to us?
Generally about 7 days, If we have it on stock, we can arrange shipment within 3 days. 

2.What about the warranty with after - sales services?
12 months warranty. Besides, we can help you to repair your problem controller freely.

 
3.What about the services and product' quality?

Our products are widely recognized and trusted by users.All the products meet with: ISO, ASTM, AATCC, BS, EN, DIN, JIS and other requireable standards.

if you have any question, pls contact us directly.

Mob: 0086-13712874307
wechat/whatsapp:008613712874307

skype:Peter.liu560