Customized Knife Ultrasonic Nozzle Cutter, Rubber Cutting Machine Handheld Plastic Cutter
USD $700 - $850 /Set
Min.Order:1 Set
Guangdong Pulisonic Ultrasonic Technology Co.,Ltd
Handheld Cutting Ultrasonic Raw Rubber Slitting 35K 800W Mechanical Plastic Cutting Machine
35K Ultrasonic Cutting Blade Easy To Replace For Plastic/Rubber Deburring/Trimming
28K/40K 60W Various Frequency Ultrasonic Piezoelectric Transducer/Sensor For Industrial Cleaner
Industrial Cleaning Equipment Ultrasonic Transducer/Sensor Parts 28K/40K 60W Dual Frequency
20K/40K/60K 120W Multi Frequency Ultrasonic Piezoelectric Transducer As Industrial Cleaner Parts
Ultrasonic cutting knife, also known as ultrasonic cutting machine, is a kind of ultrasonic equipment specially used for cutting, and it is one of the important categories of ultrasonic applications. The principle of ultrasonic cutting is completely different from traditional cutting. Ultrasonic cutting uses the energy of an ultrasonic transducer to heat and melt a part of the material to be cut, so as to achieve the purpose of cutting the material. Therefore, ultrasonic cutting does not require a sharp edge, nor does it require a lot of pressure, and will not cause chipping or breakage of the material to be cut. At the same time, because the cutting knife is doing ultrasonic vibration, the friction resistance is very small, and the material to be cut is not easy to stick to the blade. This is particularly effective for cutting viscous and elastic materials, frozen materials such as food, rubber, etc., or objects that are inconvenient to apply pressure.
Ultrasonic cutting also has a great advantage, that is, it has fusion at the cutting part while cutting, and the cutting part is perfectly sealed without causing flashing of the textile material. The use of ultrasonic cutting knife can also be expanded, such as digging holes, shoveling, scraping paint, carving and so on.
The basic composition of an ultrasonic cutting knife is an ultrasonic transducer, an horn, a tool head (knife body), and a driving power supply. The ultrasonic drive power converts the mains electricity into high frequency and high voltage alternating current, which is output to the ultrasonic transducer. The ultrasonic transducer is actually equivalent to an energy conversion device, which can convert the input electrical energy into mechanical energy, that is, ultrasound. Its manifestation is that the transducer stretches back and forth in the longitudinal direction. The frequency of the telescopic movement is equal to the frequency of the high-frequency alternating current supplied by the driving power supply. The role of the horn is to fix the entire ultrasonic vibration system, and the other is to adjust the output amplitude of the transducer. On the one hand, the tool head (blade body) amplifies the amplitude and focuses the ultrasonic waves. On the other hand, it outputs ultrasonic waves, and uses the similar cutting edge of the cutting knife to concentrate the ultrasonic energy into the cutting part of the material to be cut. Under the action of huge ultrasonic energy, this part instantly softens and melts, and its strength is greatly reduced. At this time, as long as a small cutting force is applied, the purpose of cutting can be achieved.
Main application:
Tire crown; nylon; steel wire belt plastic layer; nylon cord; inner lining; sidewall; apex; triangle ring, etc.;
Other apps:
Printed circuit boards; natural fibers; synthetic fibers; non-woven fabrics; thin synthetic resins; model making; all forms of paper; bottom film; food (cake, sugar, meat).
Model | Power | Frequency |
PLS-HJDY300 | 300W | 28KHZ,30KHZ,35KHZ,40KHZ |
PLS-HJDY500 | 500W | 28KHZ,30KHZ,35KHZ,40KHZ |
PLS-HJDY800 | 800W | 28KHZ,30KHZ,35KHZ,40KHZ |
PLS-HJDY1000 | 1000W | 15KHZ,20KHZ,28KHZ |
PLS-HJDY1200 | 1200W | 15KHZ,20KHZ,28KHZ |
PLS-HJDY1500 | 1500W | 15KHZ,20KHZ |
PLS-HJDY2000 | 2000W | 15KHZ,20KHZ |
PLS-HJDY2600 | 2600W | 15KHZ,20KHZ |
PLS-HJDY3200 | 3200W | 15KHZ |
PLS-HJDY4200 | 4200W | 15KHZ |