Moisture Less Than 1PPM Vacuum Glove Box For Lithium Ion Battery with Gas Station Purification System
It is widely used in preparing nanomaterials, Li-ion battery materials, catalysts, and metallorganics. It is a cost-effective solution for Li-Ion battery research at low cost because most Li-ion battery's electrolyte is sensitive to moisture, but not oxygen.
Working Voltage
|
220V 50/60Hz, Single Phase
|
Glove Box Chamber
|
Box Material: 304 Stainless Steel (Type 304), thickness 3mm Dimensions: 1200*750*900mm(H) Max. Positive Pressure: 810 Torr ( flowing gas only, not designed for vacuum)
|
Gloves
|
8'' Gloves,Butyl rubber material
|
Transparent Front Panel
|
Front Panel made of transparent tempered glass,thickness 8mm
|
Purification System
|
Automatic moisture remove to < 1 ppm (Li-Ion battery assembling requires <11 ppm moisture) Precision Humidity Analyzer with KF40 Flange is installed on the Purification System with accuracy +/-0.1 ppm Regeneration Temperature Controller is built-in for automatically regenerating the filter The automatic pressure control system is built in to keep the pressure at a constant level PLC touch panel is included which can set and display the humidity and pressure level. Water analyzer:0-1000ppm,H2O <1 ppm,Especially for the lithium battery manufacturing and metal organic users, can be washed and reused.
Oxygen analyzer: 0-1000ppm,O2 <1 ppm
|
Purification Pipeline
|
304 stainless steel, KF40 port
|
Vacuum pump
|
Heavy-duty vacuum pump with filter is included for faster vacuum and removing moisture Stainless steel vacuum bellow and valve are included
|
Gasses Requirement
|
Working gasses: Atmospheric Gases, N2, Argon Regeneration Gas: 95% N2 + 5%H2,One float meter built on the front of a mobile cart for accurate gas filling
|
Leakage Rate in Glove Box Chamber
|
< 3 Torr/hour
|
Transition cabin
|
Design: two circular antechambers Main chamber size: Φ380mm (Dia.)x 600mm(length),PLC control or manual control Mini chamber size: Φ150 mm(Dia.) x 300mm(L) Vacuum degree:<=-0.1MPa(right side antechambers included main chamber and mini chamber, all of that are need vacuum and display. Control way: manual
|
1.After an order is placed, when will you send to us?
Generally about 7 days, If we have it on stock, we can arrange shipment within 3 days.
2.What about the warranty with after - sales services?
12 months warranty. Besides, we can help you to repair your problem controller freely.
3.What about the services and product' quality?
Our products are widely recognized and trusted by users.All the products meet with: ISO, ASTM, AATCC, BS, EN, DIN, JIS and other requireable standards.
If you have any question, pls contact us directly.
Mob: 0086-13712874307
wechat/whatsapp:008613712874307
skype:Peter.liu560