Colloid mill, buy YTK-JMSC130 2020 new Food processing plant stainless steel vertical asphalt colloid mill for grains colloid mill on China Suppliers Mobile

Product Details

PRODUCT DESCRIPTION

JMSC130 colliod mill

The colloid mill is a machine that finely grinds and crushes fluid materials. It is mainly composed of a housing, a stator, a rotor, a regulating mechanism, a cooling mechanism, and a motor. It is widely used in many industries. 1. The stainless steel rotor and stator are ground at high speed. One of them rotates at high speed and the other is stationary, so that the material passing between the toothed slopes is subjected to great shear and friction. 2. A pair of cone-shaped rotating teeth in the colloid mill move relative to the fixed teeth. The material passes through the gap between the fixed and rotating teeth, and is subjected to shearing force, friction force, centrifugal force and high-frequency vibration to achieve crushing and emulsification. , Homogenization and dispersion purposes. 3. The fine ultra-fine particles have a high crushing efficiency. It adopts shearing, grinding and high-speed stirring force. The crushing and grinding rely on the relative movement of the tooth-shaped slope of the grinding disc. 4. Colloid mill is the ideal equipment for wet pulverization at present. Under the action of high-frequency vibration and high-speed vortex and other complex forces, the material is ground, emulsified, crushed, mixed, dispersed and homogenized.

PRODUCT SPECIFICATIONS

Size	9448105CM
Weight	300KG
Power supply	380V50HZ
Power	11KW
Output	0.5-4T/H
Hopper capacity	15L

FEATURES AT A GLANCE

COMPANY PROFILE

FAQ

Q: Can the colloid mill be used for corn, millet, soybeans, green (red) beans, rice and other grains? What is the fineness? What is the output? A:Fresh corn (without K) can be beaten in any model. The effect of adding water is better. The specific output should be consulted with customer service according to different models; rice can not be ground with water, but rice soaked for a long time can be crushed by hand That kind of rice can be processed, it is recommended to add more water to grind; mung beans, red beans, and soybeans are recommended to be soaked for a long time. The higher the hardness of the material itself, the greater the impact on the service life of the equipment. The colloid mill is fine grinding and belongs to secondary processing. According to customer feedback: corn, red beans, and mung beans can pass through a 300 mesh filter, and soybeans are basically maintained between 80-150 mesh. According to different materials, the grinding fineness is different. If you need technical support, please consult customer service. The data on the parameter table are all based on the flow rate of water instead of the output of the material. Q: Can the colloid mill hit the bones? A:The colloid mill cannot hit hard objects, it is easy to get stuck in the cavity, and then wear the grinding disc and motor load. These are all artificial and are not covered by the warranty. Q: Can the colloid mill beat seafood? What is the output? What is the fineness? A:The colloid mill can be used to beat seafood. From the material point of view, seafood contains salt and high chlorine content; if it is seafood, the material is recommended to be 316L, 304 is easy to rust. In terms of product performance, if the size of seafood to be processed is recommended to be compared according to the size of the entrance of the colloid mill, if it is easy to block the hole, then a screw feeder needs to be added to prevent the seafood from being blocked in the inlet; in general, according to Different materials are ground differently. If you need technical support, please consult customer service. The data on the parameter table are all based on the flow rate of water instead of the output of the material. Q:What is the difference between split and vertical? A: According to the function, the output is the same with the same specifications. According to the difference in appearance, since the motor is separated on the side of the split type, the seal of the cavity is aging, and the leakage will not cause damage to the motor. The vertical motor is directly at the bottom, long-term use, and the seal is aging. If you do not pay attention to the leakage When the machine is turned on, the motor is prone to short-circuit, and liquid leakage can cause damage to the motor. Q: Can the colloid mill work with high-viscosity materials? Such as honey, fuel consumption, glue? A:For high-viscosity materials, direct discharging is possible, but it is necessary to consider whether the high temperature will affect the materials. For honey, it is not recommended to use colloid mills. It is easy to high temperature and affect the taste. For fuel-consuming products, it is possible, but the model power The selection should be large and can be recycled. Q: Can colloid mills not solve product agglomeration? For example, protein powder, starch, oil-consuming salt or monosodium glutamate? A:Yes! Q: Can the colloid mill beat chili? A: It is recommended to chop the peppers (the smaller the better), and add a screw feeder to the colloid mill feed inlet; but if there are pepper seeds, the pepper seeds can easily enter the groove of the gear, and the ground material still exists. Less untreated pepper seeds. Q: Can the colloid mill beat fruits and vegetables? For example, pipa, grapes, and apples. A: Vegetables with high water content are recommended to be cut finely (the finer the better), and a screw feeder is added to the feed port of the colloid mill, but water is not required; but if the vegetable water content is not high. High fiber content, such as celery, shiitake mushrooms, kelp, bamboo shoots, water spinach, cabbage, carrots, seaweed, etc., need to add water (the more the better), the larger the selection theory, the better; (low-fiber vegetables, theoretical grinding fineness can be Reach 200 mesh, high fiber cannot be broken, and there is still a lot of fiber in the finished product); Fruits: According to different models, it is recommended to chop the fruit, if the broken liquid is strong, such as: oranges, apples, small tomatoes, pears , Watermelon, pipa, grapes can be cyclically ground in a circulating tube method, if the fluidity is poor after crushing, like durian, banana. Can add liquid as much as possible to ensure strong fluidity. If you can't add liquid, you need to use a square mouth to discharge the material. If there is a core, try to remove the core. Apple, pear, and watermelon can not be processed. Fruits are more taboo for high temperature, especially those with poor fluidity, so pay attention to them during operation. Q:Can the colloid mill produce peanuts, almonds, cocoa beans, sesame and other products? What is the fineness? What is the output? A:The colloid mill can be used for materials with relatively high oil content. Under the condition of not adding liquid, you can only choose the square mouth discharge. First, select at least 120 type or more. The inlet needs to be changed to a screw feeder. Usually The fineness is about 80 mesh, and the output is about 50-100kg per hour; if you need technical support, please contact customer service.