Latest Design Garden Tree and Branch Shredder Used in Highway Tree Maintenance

Product Description

The latest design garden branch shredder has been introduced to fill the blank of this kind of garden machinery in China. The special branch crusher produced by Hongrun Mechnical company has good crushing performance, high efficiency, convenient, safe and reliable usage.

Applied Materials

It is suitable for landscaping, forestry, highway tree maintenance, parks, golf courses and other departments.

 

Power: 22kw-75kw

Capacity: 1.5-5.5t/h

 

Before and After Treatment

 

         

 

Product Introduction

Currently, most of the garden branch crusher used by the garden Department of our country is imported from abroad, and the price is expensive. The latest design garden branch crusher has been introduced in our company to fill the blank of this kind of garden machinery in China. Our company's garden branch shredder has good crushing performance, high working efficiency, convenient use and safe and reliable.

Highway Tree Maintenance Shredder Applicable Scope

The latest design garden branch shredder is suitable for garden, forestry, road tree maintenance, park, golf course and other departments. It is mainly used to smash all kinds of branches cut down by trees, and can be used as cover, garden bed, organic fertilizer, edible fungi, biomass power generation, and can also be used for high density board, particleboard, paper making and so on. After smashing, it can be sprayed directly into the transportation vehicle, and its transportation amount is 1/10 of the original branch transport volume. This kind of garden branch shredder can smash the branches anytime and anywhere, and it is convenient to move.

 

Technical Parameters

Type	Motor KW	Diesel Type	Starting Mode of Diesel	Oil Consumption per hour	Max Diameter	Capacity	Rotate Speed	Move Type
HR-570	22kw	JL 4100(With Pressure)	Electrical	6L	≤150mm	1500kg/h	1500r/min	Pull Type
HR-670	30kw	4105	Electrical	8L	≤200mm	2500kg/h	1500r/min	Pull Type
HR-770	45kw	JL 4105(With Pressure)	Electrical	10L	≤230mm	3500kg/h	1500r/min	Pull Type
HR-870	55kw	6105	Electrical	15L	≤250mm	4500kg/h	1500r/min	Pull Type
HR-970	75kw	JL 6105(With Pressure)	Electrical	18L	≤300mm	5500kg/h	1500r/min	Pull Type

 

Characteristics and Features

The system not only protects the power part very well, but also brings great convenience to the operation of the staff. The electronic control system adopts the advanced dynamic monitoring device to monitor the rotational speed of the rotor pulley, and feedback the load of the diesel engine to the hydraulic system, so as to automatically control the entry speed of the material.

Commissioning of the Garden Branch Shredder

1.    Check whether the fasteners of each part are reliable, especially in the bearing housing. Do not forget to add the grease.

2.    The diesel tank is filled with diesel oil; the diesel engine is filled with lubricating oil; and the hydraulic oil tank is filled with anti-wear hydraulic oil.

3.    The cleanliness of hydraulic oil is not less than NAS9. The temperature of the oil is not more than 65 degrees.

4.    Check whether the rest of the auxiliary equipment is properly installed.

5.    Check whether there is a foreign body in the cutting cavity.

Packaging & Shipping

Packing

Shipping

The machine will be shipped with wooden case which has the plastic film inside, and will be delivered in 15 days after receives the payment.

Guarantee and Paymen

1. Guarantee Time: All the equipment are guaranteed in one year
2. Delivery Time: Within 15 days after the advanced payment
3. Payment Term: 30% T/T in advance,70% T/T before delivery

Contact