Product Details

Brief introduction

Product name:	PE ended ball valve
DN:	1/4"(32)~ 16"(400)
CLASS(PN):	1.0MPa

Application Standard

Pressure temperature class:	ASME B16.34
Design:	BS 5351, API 608, ASME B16.34, API 6D, GB, GOST, DIN, BS
Test:	API 6D / API 598 / GB / T 13927 and other relevant national standards.
Structure length:	API 6D, ANSI B16.10, GB 12221, GOST, DIN, BS / manufacturer standard / user requirements.
Connection end:	PE pipe
Fire protection requirements:	API 607/API 6FA/BS 6755
Anti-static electricity:	API 608/BS 5351
Valve anti-sulfur:	NACE MR. 0175

Structural features

Body structure:	Fully welded, the valve body is mainly welded from forged steel (small diameter steel pipe).
Valve seat:	Self-Relief / Double Piston Effect Seat / Upstream Self-Relief Valve Seat Downstream Double-Piston Effect Seat (Optional)
Ball:	Trunnion mounted,solid
Flow pass:	Full bore/ reduced diameter (optional)
Valve stem:	Anti-blowout, can be lengthened (optional)
Operation mode:	Manual / electric / pneumatic / pneumatic-hydraulic linkage / electro-hydraulic linkage / hydraulic (optional)
Seal:	Soft seal / composite seal (primary metal seal + secondary soft seal)
Grease injection valve:	Optional
Vent valve:	Optional
Sewage valve:	Optional

Locking device:	Optional
Bleeding valve:	No bleeding valve / single bleeding valve / double bleeding valve (optional).
Leak rating:	Soft seal: ISO 5208 Class A, metal seal: ISO 5208 Class C or higher, ANSI VI

MOC

Material of main parts
Valve body	Carbon steel / stainless steel / alloy steel plate
Ball	Carbon steel / stainless steel / alloy steel forging nickel / chrome / spray welding hard alloy
Support ring	Carbon steel / stainless steel / alloy steel forging nickel / chrome / spray welding hard alloy
Valve seat	PTFE, RPTFE, NYLON, DEVLON, MOLON, PEEK/Seal face spray welding, tungsten carbide
Valve stem	Stainless steel / alloy steel / INCONEL, etc.
O ring	NR/HNBR/NBR/FKM/EPDM, etc.
Bolts and nuts	A193/A194, A320/GB/HG, etc.

Product advantages

The valve body adopts a forged steel all-welded ball valve structure, and the pipe is connected with a PE (polyethylene plastic) pipe. This steel-plastic composite design avoids the disadvantages of switch failure and damage caused by the aging of the valve body and the operating part material in the long-term use of pure PE ball valves, so it is not easy to cause leakage caused by aging and damage to PE, and the service life is long, and Safe and reliable, easy installation on site.