Description of potato peeling machine
The potato peeler first puts the potato melon and other vegetables into the water for 25 minutes, takes out the potato peeler, presses the switch, supplies water intermittently, and opens the gate for 0.2-1 minutes. It is suitable for potato peeler, peeler, peeler, sweet potato, potato and other vegetables with high removal rate, low damage rate and high cleaning efficiency.

Potato peeling machine
Operating procedures for potato peeler 1. The equipment must be specially operated, maintained and maintained; Check whether the protective equipment and power supply are intact and abnormal; 5. Observe for 1 ~ 2 minutes after startup to ensure normal operation before use;

Types of potato peeler
The operation mode of the peeling machine is as follows:

Before starting the machine, put potatoes from the cover. LK-35 is suitable for 5-8KG each time, tp450 peeling machine is suitable for 5-8KG each time, peeling machine is suitable for 125kg each time, tap water is turned on, tap water is turned on. Clean, put the container for potatoes under the dustpan of the barrel, open the discharge door and start the power switch.

The potatoes are automatically discharged from the barrel door under the rotation of the dial.

 Continuously wash the potatoes for about five times or after each use, a part of potato skin and soil will be accumulated at the bottom of the rotating barrel. At this time, remove the barrel cover, put forward the material transfer tray, rinse with water, and then install it at one time. When removing the cylinder cover, first lift the snap ring on one side to save labor; When installing, first place the cover obliquely into the circlip on one side, and press the cover into the circlip on the other side with a little force, so that the material barrel cover is not easy to jack up during operation.

potato peeling machine features:
1) The machine is mainly composed of frame, barrel, dial plate and water inlet system.
2) The barrel plate of the machine is made of stainless steel to ensure long-term operation without rust, corrosion and harmlessness.
3) This product is reasonably designed and can easily pour things into the bucket.
4) The peeling is clean, time-saving, water-saving and power-saving. The product is clean and sanitary after peeling, and there will be no cracking and breakage.
5) It can remove taro skin, potato skin (potato), etc. when mixed with body size products, it can also peel quickly.
6) The triangle belt of the machine can be adjusted, and the rotary table in the barrel and the motor cover of the outlet hopper can be loaded and unloaded, making transportation and maintenance more convenient.

Parameters of potato peeler:
Name: LK-35 potato peeling machine
Voltage: 220V / 380V (motor can be installed according to customer requirements, and 220V is sent by default)
Rated frequency: 50Hz
Motor power: 1500W
Production capacity: 150-220kg / h
Waterproof grade: 1P
Barrel diameter: 370mm wide * 290mm high
Overall dimension: 660mm long * 450mm wide * 800mm high
Machine weight: 42kg

Application