Plastic Recycling And Granulating Line, buy PP PE bottles/containers/barrels waste plastic washing line for floating washer on China Suppliers Mobile

Product Details

Company Brief Introduction - Jiangsu Xinrongplas Machinery Co., Ltd.

Top Plastic Machinery Manufacturer Since 1996.

Our main products are: plastic pipe extrusion line and plastic recycling machine.
The main products are popular in the domestic market,such as the East China market,Southwest market,Northeast market and Central China market.The products are also exported to international market,including Russia,Australia, Southeast Asia,Middle East,East Europe.Africa and other countries.

Final Products

PET Bottle Recycling.

Waste PET bottle recycling is no doubt the most important part of recycling market.

Recycled PET is in good value and has a wide range of application: to produce PET strapping, PET sheets, fibers, etc.
The quality of waste PET bottles varies greatly, and different customers have different quality requirement of recycled PET.
Our company provides customized solutions to meet different customer needs.

Quality Table of Final PET Flakes
Moisture Content	≤2%	PVC Content	≤100ppm
Bulk density	0.25-0.35g/m³	Glue Content	≤30ppm
Flake Size	≤16mm，or customized	Metal Content	≤20ppm
Total impurity content	≤200ppm	PE/PP Content	≤20ppm
Label Content	≤30ppm	PH Value	7-8

Products Description

PET BOTTLE WASHING & RECYCLING LINE.

1. PET cleaning equipment, fully automatic production line, is an equipment specially used for crushing and cleaning waste mineral water bottles and other PET plastics.

2. A new generation of high-efficiency and water-saving equipment has been developed after repeated trials by scientific research departments.

3. PET cleaning equipment mainly includes: conveyor belt, crusher, steamer, screw elevator, parallel cleaning machine, twin screw rinsing machine, bottle flake dehydrator, silo, electric control cabinet and so on.

4. Features: exquisite appearance, low energy consumption, high output, practical and reliable.

5. Flow chart: Conveyor belt-crusher-lifting-parallel cleaning-twin screw rinsing-lifting-steamer-parallel cleaning-bottle dewatering machine-blower-storage box.

Machine List
1.0	Metal chain conveyor (sink into ground)	8.0	Steel platform	15.0	High speed dewatering machine
2.0	Bale breaker	9.0	Manual sorting table	16.0	Two way screw conveyor
3.0	Double screw loader	10.0	Metal detector and automatic separation device	17.0	Hot washer
4.0	Trommel	11.0	Crusher	18.0	High speed friction washer
5.0	Belt conveyor	12.0	Horizontal screw conveyor	19.0	Z type label blower
6.0	Label remover	13.0	Screw loader	20.0	Silo
7.0	Bottle washer	14.0	Floating washer	21.0	Electric cabinet

Machine Details

1.0 Metal chain conveyor (sink into ground)

Manually release packed PET bottles by cutting the steel wire and convey to the next machine..

2.0 Bale breaker

Disperse PET bottles which can be easier to handle.

3.0 Double screw loader

Used to convey material into next machine.

4.0 Trommel

Used to separate small impurities such as, metal, soil, sand, stone, etc.

5.0 Belt conveyor

Used to convey material into next machine.

6.0 Label remover

Remove labels attached on bottle surface.

7.0 Bottle washer

To remove impurities, soil and soil by inject high pressure water. The friction plates inside tank are made of special
wear-resistant steel for durability.

8.0 Steel platform

To place the manual sorting table. The main frame adopts thick square tube and I-beam steel.

9.0 Manual sorting table

Manually sort out labels and other impurities.

10.0 Metal detector and automatic separation device

Detect metals, when metal detected, device will collect metal without stopping the machine.

11.0 Crusher

To crush material into small sizes. With water to clean material and cool blades during crushing.

12.0 Horizontal screw conveyor

Use to collect material together and convey to next machine.

13.0 Screw loader

Used to convey material into next machine.

14.0 Floating washer

Make remaining label, caps and other impurity float and separate from PET flakes. With washing function for PET flakes.

15.0 High speed dewatering machine

To make PET flakes dried. Also with high speed friction to clean PET flakes further (get rid of glue, dirties, oil, detergent and
etc.).

16.0 Two way screw conveyor

Two convey material in next two machines at same time.

17.0 Hot washer

Use hot water mixing with caustic soda or other detergent to remove oil, glue and other impurities.
With special design to discharge impurities which float on the water (such as label, bottle caps, etc). This design will improve
washing effect.

18.0 High speed friction washer

To remove remaining caustic soda and other impurities by water and high speed friction. The friction plates inside tank are made
of special wear-resistant steel for durability.

19.0 Z type label remover

To separate remaining label and dust from PET flakes.

20.0 Silo

To temporarily store PET flakes.

21.0 Electric cabinet

To control the whole line and each machine unit.

Product Paramenters

Capacity kg/h	Total Power kw	Area Required ㎡	Labour Required	Steam Consumption kg/h	Water Consumption m³/h
500	200	350	6-8	320	1
1000	450	350	8-10	480	2
2000	700	1000	10-12	830	4
3000	900	1500	12-14	1100	6
5000	1200	2400	14-16	1500	10

Recommend Products

Hollow Wall Winding Pipe Making Machine

Corrugated Pipe Machine

Plastic Pelletizing Machine

Plastic Recycling Machine

Why Choose Us

Jiangsu Xinrongplas Machinery Co., Ltd.

Jiangsu Xinrongplas was established in 1996. The production experience is mature and rich. Among them, it has been exporting for more than 20 years, and more than 100 countries have exported. The annual export turnover is about 15 million US dollars. Our company's production base covers more than 50,000 square meters. , Modern office and production room more than 35,000 square meters, with experienced high-quality staff team, first-class equipment, perfect and effective quality assurance system, advanced and complete testing equipment.

Workshop.

We know the quality is the life of our company. Our company insists to manufacture all machine units by ourselves in order to control quality strictly by our quality inspectors. To implement this concept, we have built our own tooling and CNC workshop. Even if some parts from our certified supplier, our quality inspector will check these parts before entering into our warehouse.
Warmly welcome to visit our workshop, and sincerely hope we can have long term cooperation in near future!

Certificates & Patents.

International certification, National Certificate of equipment verification, and more than 30 invention patents.
Verification Certificates of equipments: ISO; CE Certificate , SGS, COC, TUV National Certificate of equipment
verification:standard organisation of Nigeria , CNCA certificate, Logo trademark registration,etc.

Exhibitions.

Xinrong Team.

After-Sales Team.

FAQ

1) Are we manufacture or trade company?
We are manufacture,have 24 years' experiences in this field.

2) What kind machines we produce?
Our factory produce plastic pipes machines, plastic recycling machine.

3) What kind payment we accept?
Payment term like T/T, L/C.

4) How long we need to produce the machines?
According to different machine model and configuation, we need different time, like 40 days to 2 months.

5) Will the machine be delivered on time ?
Sure,we will deliver your machine up recieving the balance payment.

6) How about the machine quality?
Our machine quality is reliable.We select every parts on the machine strictly and production and installation is done by
professional workers.We test the each production step for the best machine.

7) How about the price?
You know ,the goods counts the the price.We select the best machine raw material such as siemens electrics,schneider and ABB
etc.We will provide you the best machine with best price.

8) How long is your machine’s guarantee time?
One year

9) What can you provide for after sale service?
We can send engineers to your factory for installation and training.also 24 hours on-line service for you.