Electrical Non nuclear Soil Density Gauge Compaction Testing For Sale
Product Description
Electrical Non nuclear Soil Density Gauge Compaction Testing For Sale
Soil seedless density meter (EDG) can accurately measure the density, moisture content and compaction degree of the soil in the road and foundation.
Feature:
1. Soil model is the combination of soil electronic data and soil physical data input by users, and it is the basis of testing soil parameters in a similar soil characteristic area.
2. For soil modeling, EDG is required to collect electronic signals at different test points (the test points of this soil model are called soil testing). Each test point needs to collect an electronic signal.The maximum dry density of the soil measured in the laboratory is then fed into the instrument so that the electronic data are correlated with the physical data.
3. At least three test points (soil test) are required when making a soil model.The more test points, the more representative the model.Moreover, the greater the range of density and water content covered by the test points, the more accurate the soil model will be.
4. After the soil model is made, EDG can be used for field test. The test area is an area with the same physical characteristics as the tested soil that the experimenter intends to test.
5. A clay mold is usually made for each different test area.Different projects require different soil molds.Once the soil mold representing this area is successfully made, the soil characteristics of any Test point can be determined quickly and accurately by EDG through Field Test.
6. The actual test is the physical characteristics of soil calculated from the electronic data collected at the test point after the comparison of soil models.
Feature:
1. Soil model is the combination of soil electronic data and soil physical data input by users, and it is the basis of testing soil parameters in a similar soil characteristic area.
2. For soil modeling, EDG is required to collect electronic signals at different test points (the test points of this soil model are called soil testing). Each test point needs to collect an electronic signal.The maximum dry density of the soil measured in the laboratory is then fed into the instrument so that the electronic data are correlated with the physical data.
3. At least three test points (soil test) are required when making a soil model.The more test points, the more representative the model.Moreover, the greater the range of density and water content covered by the test points, the more accurate the soil model will be.
4. After the soil model is made, EDG can be used for field test. The test area is an area with the same physical characteristics as the tested soil that the experimenter intends to test.
5. A clay mold is usually made for each different test area.Different projects require different soil molds.Once the soil mold representing this area is successfully made, the soil characteristics of any Test point can be determined quickly and accurately by EDG through Field Test.
6. The actual test is the physical characteristics of soil calculated from the electronic data collected at the test point after the comparison of soil models.
Electrical Non nuclear Soil Density Gauge Compaction Testing For Sale
Specification
Model | OBRK-4114 |
EDG host and connector | Waterproof connection, but it is best not to use in rainy days |
Wet density range | According to typical compacted soil dry density accuracy: less than 3% of standard physical test |
Moisture content range | According to typical compacted soil moisture content accuracy: less than 3% of standard physical test |
Maximum rs-232 cable length | 100cm |
internal electric source | 12V nimh,2000mAh capacity |
Battery Life | About 24 hours |
Use humidity scope | 5%~90% |
Dimension | 50x45x25CM |
Weight | 11KG |
Consist of :
Description | Qty |
Body | 1PC |
Host | 1PC |
Electronic soil testing sensor | 1PC |
Soil nailing template | 1PC |
Hammer | 1PC |
Sensor cable | 2PC |
Soil nailing | 4PC |
Temperature probe | 1PC |
CD | 1PC |
Portable Case | 1PC |
Our Service
Installation and training
1.If buyers visit our factory and check the machine, we will teach you how to install and use the machine, and also train your workers/technician face to face.
2.Without visiting, we will send you user manual and video to teach you to install and operate.
3.If buyer needs our technician to go to your local factory, please arrange board and lodging and other necessary things.
After Sale Service
1.One year guarantee for whole machine.
2.24 hours technical support by email or calling
3.If there is any problem found of the machine, we will repair it for free in one year.
1.If buyers visit our factory and check the machine, we will teach you how to install and use the machine, and also train your workers/technician face to face.
2.Without visiting, we will send you user manual and video to teach you to install and operate.
3.If buyer needs our technician to go to your local factory, please arrange board and lodging and other necessary things.
After Sale Service
1.One year guarantee for whole machine.
2.24 hours technical support by email or calling
3.If there is any problem found of the machine, we will repair it for free in one year.
Packing & Delivery
We can delivery by sea at any port in China.
We can ship By EMS,TNT, DHL and others (door to door).
We also can ship by air via express company (door to door), it is quick and safe.
Company Profile
Our Customers
FAQ
Q:Are you trade company or factory?
A:We are trade company but we also have own factories. Building trade company is just for exporting various types of concrete mould and others products.
Q:Why your price is higher than others?
A:As we persist on that each factory should put quality at the first place. We spend time and money on developing how to make machines much more automatic, accurate and high quality. We can make sure that our machine could use more than ten years without any problem. We can provide one years free quality assurance.
Q:How to visit your company?
A:1. Fly to Beijing airport: By high speed train From Beijing Nan to Cangzhou Xi (1 hour),then we can pick up you.
2. Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pick you up.
A:We are trade company but we also have own factories. Building trade company is just for exporting various types of concrete mould and others products.
Q:Why your price is higher than others?
A:As we persist on that each factory should put quality at the first place. We spend time and money on developing how to make machines much more automatic, accurate and high quality. We can make sure that our machine could use more than ten years without any problem. We can provide one years free quality assurance.
Q:How to visit your company?
A:1. Fly to Beijing airport: By high speed train From Beijing Nan to Cangzhou Xi (1 hour),then we can pick up you.
2. Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pick you up.
Contact Us