Battery Testing Machine, description about Factory price high quality battery safety battery Weight Impact Testing cabinet on China Suppliers Mobile

Product Details

Product Description

Product Application

Battery impact tester is to test the safety performance of battery through different weights from different heights to impact different stressed area. The battery shall have no flame or explosion after series of tests by this battery impact tester. This equipment is a popular battery tester to battery manufacturers.

Standards:

IEC62133
UN38.3
SJ/T11169-1998
SJ/T11170-1998
UL1642:2008
UL2054:2008
QC/T 743-2006
QC/T 744-2006
GB/T18287-2000
GB 8897.4-2002
idt IEC60086-4:2000

SPECIFICATIONS
Drop weight	9.1kg±0.46Kg
Drop height	610 mm or 1000mm
Impact way	Lift the ball to a certain height and release it. The ball falls freely in the vertical direction without tilting or shaking.
Cross bar diameter	15.8mm
Internal material	stainless steel 304
External material	Galvanized cold plate paint treatment
Exhaust port	On the back of the box 120mm
Door	Single door, double layer, open observation window (tempered glass) with explosion-proof membrane, cold handle door lock
Impact surface	stainless stelel plate
Weight	about 145kg
Power supply	AC 220V 50/60HZ

Structure:

Upper and lower impact surface: stainless steel plate
Inner box material: SUS#304 stainless steel plate
Carton material: cold plate paint
Filling material: glass wool
Impact method: free fall impact
Box Door: single door, double door, open observation window, cold handle door lock
Protection device: upper and lower limit protection switch, safety latch (located at the bottom of the guide tube, protects against sudden power failure)

The main electrical components:

Electromagnet: Taiwan Chang Yi
Electronic Components: Hong Kong Aix
Push Button Switch: Hong Kong Aix
Use voltage: 220V±10% 50HZ
Operating Environment: Permitted Operating Environment 0 ~ 35°C
Performance Guaranteed Environment: 5 ~ 35°C

Standard configuration:

One main machine for testing machine, two standard falling balls, two safety bolts, one limiting pole.

SJ/T 11170-1998 Household and commercial battery safety standard requirements:

1. Test sample The battery should be placed on a flat surface. A 15.8 mm (5/8 inch) diameter rod was placed crosswise at the center of the sample. A 9.1 ± 0.16 (20 ± 1 pound) weight was dropped from the height of 610 ± 25 mm (24 ± 1 inch) onto the sample.

2. The cylindrical or prismatic battery should have its longitudinal axis parallel to the plane and perpendicular to the center of the recumbent specimen. The longitudinal axis of a 15.8mm (5/8 inch) diameter shaft is subjected to impact. The prismatic battery also has to be rotated 90° about its longitudinal axis so that its wide side and narrow side can withstand the impact test. Each sample battery is subjected to one impact, and different samples are used for each test.

3. Coin-type or button-type batteries, to make the surface of the test sample parallel to the plane. A 15.8 mm (5/8 inch) diameter curved surface was placed on the center of the battery.

Result: The sample should not explode or catch fire

Certifications

Our Service

Pre-Sales Service

* Inquiry and consulting support.

* Sample testing support.

* View our Factory.

After-Sales Service

* Training how to instal the machine, training how to use the machine.

* Engineers available to service machinery overseas.

If you meet any problems in future during testing process, we promise we will give you a reply within 48 hours and solution provide within 3 working days. If customers require on-site service, the transport and travel expense shall be borne by customer.

Packing & Delivery

Company Information

Dongguan Huanrui Environmental Test Equipment Co., Ltd. is an influential manufacturer, specializing in the production environmental testing equipment over 18years. Have won the honorary title of High-Tech Enterprise, obtained national patents of various products and technologies and been certificated by ISO9001:2015 International Quality Management System. Our company main products are programmable constant temperature and humidity test box, walk-In aging test room, cold and heat shock test box, rapid temperature change test box, high and low temperature test box, and our products are used in electronic electrician, communication, computer, aviation, weapon, vehicle, ship, petrifaction and other industries and fields.

FAQ

Q: Are your company a trading one or a factory?
A: We are a factory over18-year experience.

Q: After an order is placed, when to deliver?
A: Generally about 25days. If we have inventory, we can arrange to ship within 3-5 days. Please be aware that our production lead times depend on specific items and item quantities.

Q: What about the product' services and quality?
A: We have Pre-service, middle-service and after-sale service. Can provide video training to show you how to install & operate. We can also arrange engineer to train the operation of equipment to customer's company when you need. Core components almostly are from the import.