Battery Testing Machine, buy Universal Digital Battery Car interior horizontal inBurning Tester Factory Cable Burning Test Machine on China Suppliers Mobile

Product Details

Product Description

Product Application

Battery Burning Tester is mainly used for the battery flame resistance test. The battery performance test is mainly to test the reliability of the battery when the battery is exposed to an open flame, and the battery's anti-fire performance.

Method: The screen is fixed at a distance of 38.1mm above the top of the burner, the screen has 20 holes per 25.4mm, and the wire diameter is 0.43mm. Ignite the burner and observe the burning of the battery at the same time until the battery explodes or the battery is burned; and time the combustion process.

SPECIFICATIONS
Model	REB
Burner	Benson lamp, the inner diameter of the pipe is 9.5mm, about 100 mm long
Time of flame application	0~999.9 seconds±0.1 seconds
Test hole surface diameter	102mm
Test hood height	12''(305mm)
Test Cover Width	24''(610mm)
Test mesh screen	20 meshes woven from stainless steel wire with a diameter of 0.43 mm / 0.017 inch
Octagonal mask material	aluminum mesh , made of aluminum wire having a diameter of 0.010 inch ( 0.25 mm ) woven into a mesh containing 16~18 mesh per inch
The test part	stainless steel, the box door is two layers of 5mm thick tempered glass, the state of the tested sample can be observed, the rear side is designed with exhaust fans, and the external exhaust interface is reserved
Power supply	220V, 50/60Hz

Burning particle test:

Each test cell was placed on a 20 hole per square inch (25.4 mm) wire gauze and a 0.017 inch thick wire was placed a distance of 1-1/2 (38.1 mm) from the burner. Fuel and air are sprayed at a speed that provides a bright blue flame so that the wire mesh turns bright red. A rough asbestos panel was placed 3 feet (0.91m) from the center of the stencil. Crude asbestos is a square yard, consisting of four layers of 0.4-0.6 ounces of heavy and coarse asbestos material per square yard. The test sample is placed in the center of the rough asbestos that Mars or combustion particles can spray onto. In some cases, it should be required to circle the experimental sample inside the grid and then light the burner to observe the cell until it explodes or is destroyed.

Crude asbestos panels do not ignite when the battery is tested as described above.

Spray experiment

The experimental battery was placed on a flat table with a 4 inch diameter hole and covered with a lid. The cover consists of 20 holes per foot of wire mesh or 0.017 inch (0.43 mm) wire. Place a screen with a total of 8 screens, 2 feet wide (610mm), and 1 foot height (305mm) on each side, as shown in Figure 23.1. The wire mesh consisted of 0.010 inch (0.25 mm) diameter wire at 16-18 wires per inch. The sample is placed on a metal net, covering the hole in the center of the table and then heated until it explodes or until it is destroyed. The safety valve faces parallel to the asbestos cloth.
When the above experiment was performed, no part of the explosion cell penetrated the screen, and no part or all of the cells protruded from the screen.

Certifications

Our Service

Pre-Sales Service

* Inquiry and consulting support.

* Sample testing support.

* View our Factory.

After-Sales Service

* Training how to instal the machine, training how to use the machine.

* Engineers available to service machinery overseas.

If you meet any problems in future during testing process, we promise we will give you a reply within 48 hours and solution provide within 3 working days. If customers require on-site service, the transport and travel expense shall be borne by customer.

Packing & Delivery

Company Information

Dongguan Huanrui Environmental Test Equipment Co., Ltd. is an influential manufacturer, specializing in the production environmental testing equipment over 18years. Have won the honorary title of High-Tech Enterprise, obtained national patents of various products and technologies and been certificated by ISO9001:2015 International Quality Management System. Our company main products are programmable constant temperature and humidity test box, walk-In aging test room, cold and heat shock test box, rapid temperature change test box, high and low temperature test box, and our products are used in electronic electrician, communication, computer, aviation, weapon, vehicle, ship, petrifaction and other industries and fields.

FAQ

Q: Are your company a trading one or a factory?
A: We are a factory over18-year experience.

Q: After an order is placed, when to deliver?
A: Generally about 25days. If we have inventory, we can arrange to ship within 3-5 days. Please be aware that our production lead times depend on specific items and item quantities.

Q: What about the product' services and quality?
A: We have Pre-service, middle-service and after-sale service. Can provide video training to show you how to install & operate. We can also arrange engineer to train the operation of equipment to customer's company when you need. Core components almostly are from the import.