Lab Equipment Hot And Cold Temperature Impact Test machine, Thermal Shock Chamber 

Uses:

Hot and Cold Temperature Impact Tester Thermal Shock Test Chamber used to test the material structure or composite material in an instant by the extremely high temperatures and very low temperature continuous environment which can endure the degree of order in the shortest possible time to test its thermal expansion and contraction caused by chemical changes physical harm.
The applicable the object material, including metals, plastics,  rubber, electronic, ..., etc., can be used as the basis of its product  improvement or reference.

Design Standard:

GB11158

GB10589-89

GB10592-89     

GB/T10586-89    

GB/T2423.22-2001  

GB/T2423.1-2001  

GB/T2423.2-2001    

GB/T2423.3-93      

GB/T2423.4-93      

ASTM D1735  

EIA - 364-59    
IEC60068-2-1.1990    

IEC60068-2-2.1974      

IEC 68-2-30       

IEC68-2-03

EIA - 364-31C 

Character:

Automatically setting of pro-cooled and pre-heated air.
Testing samples don't move, cable port is available for power on testing.
Powerful interactive touch screen controller, easy operation and setting
High accurate temperature recovery with PID auto tuning, High formula memory capacity can store 120 patterns, 9999 cycles, setting time for each pattern is 9999 Hrs 59 Mins
Auto defrost function
Three sections: High temperature zone, low temperature zone, testing zone.

Image:

Parameter 

Model	RTS-50	RTS-80	RTS-100	RTS-150	RTS-200	RTS-300	RTS-480
System	(BTC) Balanced temperature control system
High temperature chamber	+60℃~200℃
Preheating time	+60℃~200℃ About 20 minutes
Low temperature chamber	-55℃~10℃,    -70℃~10℃,   -80℃~10℃
Precooling time	+20℃~-55℃  60 minutes,  +20℃~-75℃  75 minutes,  +20℃~-80℃  90 minutes,
Test chamber	-40℃~150℃,    -55℃~150℃,   -65℃~150℃
Recovery time	Within 5 minutes, heat exposure 30 minutes, low exposure 30 minutes,
Transfer time	Within 10 seconds
Temperature flucturation	±1.0℃
Temperature deviation	≤±2.0℃
Test weight (KG)	3.5	5	5	5	10	12	15
Interior material	SUS#304 Stainless steel plate
Exterior material	Backed paiting steel or stainless steel(SUS304)
Insulation material	Rigid polyruethane foam +glass fibre
Floor bearing load	500Kg/m3
Refrigeration system	Air cooled (Water cooled type is option)
	Cascade type, hermetic/semitight compressor,CFC free refrigerant
Controller	Color LCD screen in English/Chinese, programing,communicating function
Safety devices	No welding wire switch,compressor overheating and over current protection,over temperature protection, blower overload protection,dry heating machine protector,low water protection,fault warning system.
Power	AC380±10% 50HZ 3 phase 4 wires+ground wires