Other testing equipment, buy TP-112M Surface Area and Pore Size Analyzer on China Suppliers Mobile

Product Details

Surface Area and Pore Size Analyzer TP-112M

▪ Surface area measurement:
BET surface area (single -point and multi-point)
STSA
Langmuir surface area
T-plot method the total inner surface area of micro pore
BJH adsorption cumulative surface area of the total pore
BJH desorption cumulative surface area of the total pore

▪ Determination of pore volume:
Single point total pore volume
BJH adsorption cumulative total pore volume
BJH desorption cumulative total pore volume
T-plot method the total pore volume of micro porous

▪ Determination of average pore size:
Adsorption average pore diameter
BJH adsorption average pore diameter
BJH desorption average pore diameter
The most frequency pore

▪ Pore size distribution:
BJH adsorption and desorption differential pore size distribution (dV/dD-D) and (dV/dlogD-D)
BJH adsorption and desorption /integral distribution (or cumulative distribution)
MP method micropore distribution

1. Single station analysis; two ports can be carried out degassing simultaneously. The highest temperature of degassing is 400℃;
2. Multi-point BET surface area test can be done automatically within 40-60 minutes; (not including degassing time);
3. With liquid nitrogen surface control systems and integrated software compensation technology, it is ensured that the non-uniform temperature field of the test sample chamber is constant relatively;
4. The introduction of advanced technology thermostat folder, with a large capacity vacuum liquid nitrogen dewar and anti-volatile elements;
5. Adjustable multi-channel parallel-controlled vacuum system, built-in anti-splash units, and "Ladder" splash procedures to effectively prevent ultrafine powder from flying away, completely avoid the contamination of the instrument;
6. A control valve position indicator is on the instrument control panel, and the experimenter can be more visible and intuitive to control valves, user-friendly design;
7. Equilibrium pressure intelligent control technology, the sample absorption / desorption equilibrium pressure determine
automatically and data acquisition, adsorption-desorption isotherms curve test points can be controlled automatically;

Voltage	100V~230V ± 10V
Frequency	50/60Hz
Maximum power	300W
Connection	grounding, single-phase power socket
Dimension	Length: 74cm (29.1 inches) Width: 50cm (19.7 inches) Height: 94cm (37.0 inches)
Weight	60kg (132.3 lbs)
Accessories Weight	31kg (68.3 lbs )
Installation requirements	L 100 * W60cm (not including space computers taking up)
Temperature	15℃ -40℃
Maximum relative humidity	30%--60%
Adsorbed Gas	Non corrosive gases, such as N2, Ar, Kr, H2, O2, CO2, CO, NH3, CH4, etc
Pressure Sensor at Analysis Station	1000 torr, 1; Accuracy: ±0.15% (F.S.)
Pressure Sensor at P0 Station	1000 torr; Accuracy: ±0.15% (F.S.)
Degas System	Samples at 2 stations can be pretreated simultaneously under vacuum with heating
Degas Temperature	Ambient to 400 ℃. Free to set up target temperature
Vacuum Pump	Two-stage rotary vane mechanical vacuum pump, the ultimate vacuum is 6.7*10-2 Pa
Analysis Port	Samples on the 2 analysis bits can be tested alternately
Test Principle	Gas adsorption by static-volumetric analysis
Measurement Range of Specific Surface Area	0.0005 m2/g to the infinity; Standard sample repetition is less than ± 1.0%
Test Range of Pore Diameter	0.35 nm-500 nm; pore repeated deviation is less than 0.2 nm in the accurate analysis of porous materials with pore greater than 2 nm
Minimum Pore Volume	0.0001 cm3/g
Range of Relative Pressure P/P0	10-4-0.998

1.1.Fully Automatic Karl Fischer Water Content Tester TP-2100
2.Digital Karl Fischer Water Content Tester TP-6A
3.Kinematic Viscosity Tester VST-2000
4.Kinematic Viscosity Tester TPV-8
5.Kinematic Viscosity Tester VST-3000
6.Fully Automatic Oil Acidity Tester (6 cups) ACD-3000I
7.Fully Automatic Surface/Interface Tension Tester IT-800

8.Automatic Surface/Interface Tension Tester (Platinum Plate Method) IT-800P
9.Fully Automatic Open Cup Flash Point Tester TPO-3000
10.Fully Automatic Closed Cup Flash Point Tester TPC-3000
11.Digital Open Cup Flash Point Tester TPO-100
12.Digital Closed Cup Flash Point Tester TPC-100
13.Cloud Point & Pour Point Tester PT-2000

MOQ	1 Set
Trade Terms	EXW, FOB, CIF, CFR
Payment Terms	T/T, L/C
Port of Loading	Any Port of China
Packing Method	Internaional Standard Wooden Case
Transportation Method	By Sea, By Land, By Air, By Express
Supply Capability	100 Sets/Month

* The warranty period is 24 months from commissioning acceptance date on. After the warranty period is over we provide lifelong maintenance and technical service.
* We guarantee the maintenance time no more than 3 working days and response time within 1 hour.
* We build instrument service profile for our clients to record the product service and maintenance conditions.
* After instruments start service, we will pay follow-ups to collect the service conditions.

Chongqing TOP Oil Purifier Co., Ltd

Located at Chongqing city--a southwest electromechanical manufacturing center as well as national municipality, Chongqing TOP is a professional leading manufacturer and supplier of oil purifiers and various related testers. Our company consists of departments respectively for technological development, machinery manufacture, instrument manufacture and quality control etc.

Welcome to visit our website, welcome your inquiry.

Ray Tuo | Sales Manager
CHONGQING TOP OIL PURIFIER CO.,LTD
Manufacture oil purifiers and supply test equipment.
Add: No. 1, Jianlong N. Rd., Jiulongpo District, Chongqing, China
E: sales7@topoilpurifier.com
Cell: 0086-13340266216 (Whatsapp/Wechat) | Skype: topoilpurifier
Tel: 0086-23-88901306 | Fax: 0086-23-88901306
;