Product Details

New GC-7890MD Gas Chromatograph For Transformer oil

Product Features

New GC-7890MD Gas Chromatograph For Transformer oil

The process design of GC-7890SD transformer oil chromatograph is in full compliance with the People's Republic of China standard GB / T7252-2001 "Guidelines for the Analysis and Judgment of Dissolved Gases in Transformer Oil", GB / T17632-1998 "Gas Chromatographic Determination of Gas Content in Insulating Oil" and Ministry of Electric Power DL / T722-2000 "Guidelines for Analysis and Judgment of Dissolved Gases in Transformer Oil" related to the design of chromatographic processes. The machine is equipped with a high-sensitivity thermal conductivity detector, a hydrogen flame ionization detector, and a nickel catalyst conversion furnace, It can realize the determination of all 11 gas components dissolved in transformer oil: hydrogen, carbon monoxide, carbon dioxide, methane, ethylene, ethane, acetylene, propyne, propane, propylene, and allene in one injection. Its performance meets the requirements of the gas chromatograph in the above standards.

Standard:
GB / T7252-2001 "Guidelines for the Analysis and Judgment of Dissolved Gases in Transformer Oil", GB / T17632-1998 "Gas Chromatographic Determination of Gas Content in Insulating Oil", DL / T722-2000 "Analysis and Judgment of Dissolved Gases in Transformer Oil Guidelines".GC-7890SD transformer oil chromatograph is equipped with two detectors: TCD detector and FID. Among them, H2, through TCD detection; CO, CO2, CH4, C2H4, C2H6, C2H2, propyne, propane, propylene, allene through FID Detection.

1、Comprehensive parameters
Dimensions: 565×505×500[mm ];(Length × height × width)。
Packing size:730×650×610[mm ];(Length × height × width)。
Chromatographic columns: two dedicated chromatographic columns
Weight:65Kg

2、Temperature control, oven temperature control:
Room temp add 6℃ ~ 350℃(set at 1℃ increment),
(The upper limit of the set parameter can be effective up to 399 ° C, which allows users to use it but does not guarantee
technical indicators)
Temperature fluctuation: not more than ± 0.1 ℃; (ambient temperature change 10 ℃ or power supply voltage change 10%)。
Temperature gradient: ± 1% (temperature range of 100 ℃ ~ 350 ℃)。
Program heating Program order: 7 steps.
Heating rate:0~40℃/min(Any setting in 0.1 ℃ increments)。
Cooling rate: The time for the oven temperature to drop from 200 ° C to 100 ° C is not more than 3 minutes.

Thermal conductivity detector temperature control
Room temperature plus 20℃ ~ 350℃ (index parameter).
(The upper limit of the set parameter can be effective up to 399 ° C, which allows users to use it but does not guarantee
technical indicators) 。
Temperature control accuracy: not more than ± 0.1 ℃.

Temperature of the remaining heating zone:
Room temperature plus 20℃ ~ 350℃ (index parameter).(The upper limit of the set parameter can be effective up to 399 ° C, which
allows users to use it but does not guarantee technical indicators) .
Temperature control accuracy: not more than±0.2℃.

3、FID detector
Detection limit:≤1×10-12g/s[n-C16]。
noise:≤3×10-14A。
Drift:≤5×10-13A/30min。
Dynamic linear range:≥106。

4、TCD detector
Sensitivity:S≥10000mv.ml/mg (N-hexadecane / isooctane)
Baseline noise:≤20μv
Baseline drift:≤50μv/30min
Linear:≥105
Carrier gas flow stability:≤1%

5、Application Environment
Ambient temperature:(5~35)℃。
Relative humidity: no greater than 85%。 Supply voltage: 220±10%。 Power frequency: 50±0.5Hz。 Maximum power consumption: 2500W。

1.1.Fully Automatic Karl Fischer Water Content Tester TP-2100
2.Digital Karl Fischer Water Content Tester TP-6A
3.Kinematic Viscosity Tester VST-2000
4.Kinematic Viscosity Tester TPV-8
5.Kinematic Viscosity Tester VST-3000
6.Fully Automatic Oil Acidity Tester (6 cups) ACD-3000I
7.Fully Automatic Surface/Interface Tension Tester IT-800

8.Automatic Surface/Interface Tension Tester (Platinum Plate Method) IT-800P
9.Fully Automatic Open Cup Flash Point Tester TPO-3000
10.Fully Automatic Closed Cup Flash Point Tester TPC-3000
11.Digital Open Cup Flash Point Tester TPO-100
12.Digital Closed Cup Flash Point Tester TPC-100
13.Cloud Point & Pour Point Tester PT-2000

MOQ
1 Set
Trade Terms
EXW, FOB, CIF, CFR
Payment Terms
T/T, L/C
Port of Loading
Any Port of China
Packing Method
Internaional Standard Wooden Case
Transportation Method
By Sea, By Land, By Air, By Express
Supply Capability
100 Sets/Month

* The warranty period is 24 months from commissioning acceptance date on. After the warranty period is over we provide lifelong maintenance and technical service.
* We guarantee the maintenance time no more than 3 working days and response time within 1 hour.
* We build instrument service profile for our clients to record the product service and maintenance conditions.
* After instruments start service, we will pay follow-ups to collect the service conditions.

Chongqing TOP Oil Purifier Co., Ltd

Located at Chongqing city--a southwest electromechanical manufacturing center as well as national municipality, Chongqing TOP is a professional leading manufacturer and supplier of oil purifiers and various related testers. Our company consists of departments respectively for technological development, machinery manufacture, instrument manufacture and quality control etc.

Welcome to visit our website, welcome your inquiry.

Ray Tuo | Sales Manager
CHONGQING TOP OIL PURIFIER CO.,LTD
Manufacture oil purifiers and supply test equipment.
Add: No. 1, Jianlong N. Rd., Jiulongpo District, Chongqing, China
E: sales7@topoilpurifier.com
Cell: 0086-13340266216 (Whatsapp/Wechat) | Skype: topoilpurifier
Tel: 0086-23-88901306 | Fax: 0086-23-88901306
;

You May Like

Find Similar Products By Category

You May Like

View More
Chat Now Contact Now