Other testing equipment, buy TP1200 CNC Fume Hood on China Suppliers Mobile

Product Details

TP1200 fume hood

Shell: The shell is made of high-quality cold-rolled steel plate for
CNC machining, cutting, positioning, punching, bending and welding. After pickling and phosphating, the epoxy resin powder is sprayed and cured at high temperature. High adhesion, surface hardness and corrosion resistance, beautiful appearance.

Inner shell: Laboratory-specific resist material with 5mm gray acid and alkali resistant organic solvent. It has a detachable
maintenance hole for easy maintenance of circuits, waterways and air lines.

Countertop: It adopts 12.7mm thick solid physicochemical board, the edge is thickened, and the arc is closed on the back side and the sink is treated.

Control panel: Laboratory-specific LCD control panel, can control the entire circuit system, including fans, dampers, sockets, lighting, etc., convenient and practical.

Fluorescent lamp: 40W explosion-proof fluorescent lamp is hidden under the panel to ensure the working face is not lower than the brightness of 500LUX, and does not touch the airflow in the detoxification cabinet.

Deflector: 6mm thick anti-double plate, resistant to strong acid and alkali corrosion, high temperature resistance. When fixing the inner liner and the deflector, it adopts no rivet design, is connected by special anti-corrosion material, and has a fixed experimental frame and distillation inside. s installation.

Lifting door: 6mm thick safety explosion-proof tempered glass, sliding freely, can be stopped at any position and can open the glass window horizontally. The design is provided with a gas flow grid to prevent gas overflow, to prevent gas overflow.

Control circuit: It adopts high-quality integrated circuit to control the integrated touch panel, which can adjust the fluorescent lamp and fan switch. Efficient and easy to use.

Power supply: use laboratory dedicated power outlet, multi-function socket

The distribution box meets the 220V and 380V power supply requirements, and has leakage and motor protection devices.
Handle: It adopts molded one-piece PVC treatment, beautiful appearance, humanized design, corrosion resistance, acid and alkali resistance.

Hinge: It adopts laboratory special anti-corrosion hinge, which has good elasticity and beautiful appearance. It has no noise during use. The small angle can automatically close the door panel without having to close it one by one.
Adjusting the foot: The injection foot is adjusted by 10mm diameter, which is shockproof, moisture proof and corrosion resistant.

The height of the cabinet is adjusted according to the indoor floor. The maximum adjustment is 0-30mm.
Gas collecting hood: Made of PP material, resistant to acid and alkali corrosion

Process requirements: After all the steel plates are welded and sprayed with epoxy resin powder, there is no solder joint
visually. All water, electricity, and gas circuits are required to be safe, suitable, and concealed. A service hole is provided in
the back panel of the cabinet. The novel baffle design has no dead angle of exhaust, so that harmful gases in different height spaces are discharged from different sections. The fume hood discharges the air in the fume hood at an operating surface wind speed of 0.4-0.6 m/s to ensure that no residual gas is present. High ventilation efficiency and low noise.
High-quality PP electric anti-corrosion damper to avoid crosswind and return air in the fume hood, effectively ensure the safety of the experiment, and adjust the wind speed by adjusting the angle of the damper

Exhaust duct: The duct is made of 250-315 PP in diameter, as well as elbows, tees, reducers, direct and metal mounting brackets, etc.
Fan: High-quality PP centrifugal fan, straight row 300W, when the operating door of the fume hood is fully open, the surface wind speed value obtained by the anemometer test should be 0.4m-0.5m/s. Wire and cable: GB 4 square

1.1.Fully Automatic Karl Fischer Water Content Tester TP-2100
2.Digital Karl Fischer Water Content Tester TP-6A
3.Kinematic Viscosity Tester VST-2000
4.Kinematic Viscosity Tester TPV-8
5.Kinematic Viscosity Tester VST-3000
6.Fully Automatic Oil Acidity Tester (6 cups) ACD-3000I
7.Fully Automatic Surface/Interface Tension Tester IT-800

8.Automatic Surface/Interface Tension Tester (Platinum Plate Method) IT-800P
9.Fully Automatic Open Cup Flash Point Tester TPO-3000
10.Fully Automatic Closed Cup Flash Point Tester TPC-3000
11.Digital Open Cup Flash Point Tester TPO-100
12.Digital Closed Cup Flash Point Tester TPC-100
13.Cloud Point & Pour Point Tester PT-2000

MOQ	1 Set
Trade Terms	EXW, FOB, CIF, CFR
Payment Terms	T/T, L/C
Port of Loading	Any Port of China
Packing Method	Internaional Standard Wooden Case
Transportation Method	By Sea, By Land, By Air, By Express
Supply Capability	100 Sets/Month

* The warranty period is 24 months from commissioning acceptance date on. After the warranty period is over we provide lifelong maintenance and technical service.
* We guarantee the maintenance time no more than 3 working days and response time within 1 hour.
* We build instrument service profile for our clients to record the product service and maintenance conditions.
* After instruments start service, we will pay follow-ups to collect the service conditions.

Chongqing TOP Oil Purifier Co., Ltd

Located at Chongqing city--a southwest electromechanical manufacturing center as well as national municipality, Chongqing TOP is a professional leading manufacturer and supplier of oil purifiers and various related testers. Our company consists of departments respectively for technological development, machinery manufacture, instrument manufacture and quality control etc.

Welcome to visit our website, welcome your inquiry.

Ray Tuo | Sales Manager
CHONGQING TOP OIL PURIFIER CO.,LTD
Manufacture oil purifiers and supply test equipment.
Add: No. 1, Jianlong N. Rd., Jiulongpo District, Chongqing, China
E: sales7@topoilpurifier.com
Cell: 0086-13340266216 (Whatsapp/Wechat) | Skype: topoilpurifier
Tel: 0086-23-88901306 | Fax: 0086-23-88901306
;