Automatic  Control  Vacuum Oil Purifier Equipment / Deep Fryer Cooking Oil Filter Machine

 

 

HFD series oil cleaning machine is closed type and stainless steel mesh filtering system. It is closed 

operated. So it is widely applied in chemical, petroleum, food, colloid, free carbon etc. It adopts novel structure an is mainly composed of filter tank, filter mesh, slag discharge system, cap opening part, butterfly valve of big size etc. It is characterised by closed filtering operation, easy 

discharging, no environmental pollution and oil loss, low filtering cost etc.

 

 

Features:

1. Completely closed filtering system, no environmental pollution.

2. Automatic pull-out structure of filter plate, observe conveniently, easy clean.

3. Double-side filter, larger filtering size, large capacity for holding residua.

4. Vibrating discharging system, reduce labor intensity.

5. This equipment also can be done as the big capacity and big size filtering system.

 

Technical data

Model	Capacity  (ton/hr)	Dimension  (LxWxH,mm)
VFD-10	1.5 to 3	1100x1085x2300
VFD-12	1.5 to 4	1580x1100x2500
VFD-15	2 to 5	1680x1185x2500
VFD-20	3.5 to 6	1680x1185x2800
VFD-25	4 to 7	1780x1285x2800
VFD-30	4.5 to 8	1880x1385x2800
VFD-36	5 to 9	1880x1385x3070
VFD-45	6.5 to 11	1980x1485x3200
VFD-52	7.5 to 13	2080x1585x3300
VFD-60	8.5 to 15	2180x1685x3420
VFD-70	9.5 to 16	2380x1685x3420
VFD-80	10.5 to 18	2380x1785x3530
VFD-90	11.5 to 21	2380x1885x3730

 

Structure 

 

A.Filter tank

The filter tank is a closed container composed by connecting of the main body and top cap with quick opening bolt. Between the flanges of top cap and tank body it’s sealed by rectangular rubber sealing gasket. Below the filter tank are collector tube of filter mesh, inlet and outlet.

 

B. Filter mesh

The filter mesh is a major work-piece of the filter machine. The filter mesh consists of multilayer stainless steel mesh of different specifications. In the middle of it is liquid passageway; the periphery of filter mesh is rectangular or round cross section frame of stainless steel plate as liquid concentrating passageway. The filter mesh and framework are riverted together. Below the filter mesh is outlet connector inserted into liquid concentrating tube. Between the connector and liquid concentrating tube socket it’s sealed by O shape rubber ring.

 

C. Discharge device

The filter mesh plate is equipped with automatic vibrating discharge device when filtering oil material.

The vibrator is mainly composed of cylinder body and reciprocating moved piston. When the compressed air goes by oil mist and enter the air inlet of cylinder, it pushes the piston to move reciprocatingly to vibrate. The vibrating frequency of vibrator is controlled by the pressure adjuster and is in direct proportion to the inlet pressure. The air pressure of vibrator ranges from 0.4 Mpa to 0.6 Mpa. The vibration amplitude is controlled by regulation of the heavy hammer behind of the cylinder cap and is in direct proportion to hammer’s weight. To make the vibrating discharge thorough, the vibrator amplitude and frequency should be adjusted according to the viscosity quality of residue.

For the filter machine with vibrator, there is a special locking mechanism on the top of filter mesh. It stretches out of the filter tank to hold the vibrator. The reciprocating movement of vibrator is conveyed to the filter mesh to make the residues adhered on the mesh to fall.

 

 

D. Cap opener

There are two types of cap opener for the filter machine. One is spiral lifting type and it need adding lube oil into the oiling ring. The other one is hydraulic jack type and this type requires use and maintenance strictly according to its operation instruction; under its top cap no stopping of people.

 

E. Butterfly valve of big size

Below the filter tank is equipped with electric, pneumatic or manual discharge butterfly valve of big size. For the actuator of pneumatic butterfly valve, it needs 0.4 ~ 0.6 Mpa compressed air. The compressed air goes by fine mist then into butterfly valve air cylinder. The whole opening and closing process should be carried out according to the instructions on the operation card. (Working with material inside the filter tank is forbidden.) To ensure normal work of the butterfly valve, the sealing parts of valve plate and sealing rubber ring should be washed often.

 

Horizontal type

 

 

 

 

 

 

About us:

 

Chongqing TOP Oil Purifier Co., Ltd is a professional leading manufacturer and supplier of oil purifiers and oil testers. We have tremendous strength in the fields of research, development and manufacturing with professional mass-production ability, perfect sales network, excellent after-sales service as well as a perfect image we earned in the competitive market. 

 

Our main products are: insulting oil purifier, turbine oil purification machine, hydraulic oil purifier, lubricating oil filtration machine, transformer oil filtering machine, fuel oil restoration, steam-turbine oil reconditioner, dielectric fluid regeneration system, circuit-breaker oil recovering system, compressor oil recovering machine, gear oil renewal machine, coolant oil treatment, quenching oil reclaiming machine, oil and water separator, steel-rolling oil regeneration equipment, waste automobile oil recycling equipment, other petroleum machines; petroleum products testers and other kinds of tester, etc.

 

TOP Oil Purifiers are widespread in the fields of electric power, petrifaction, mineral, shipbuilding, steel construction, bridge, automobile and railway, and help a lot with reducing our clients’ energy consumption and the environmental pollution. 

 

Our company takes the mission of existing on the basis of quality as well as developing regarding technical innovation. We introduce foreign advanced technology of vacuum oil purifying, research and manufacture oil purifying equipment available both in domestic and international markets. 

 

Top will as always make great effort to provide the best purifying equipment.