Product Application:

Dielectric loss measurement is a basic method in insulation test and effectively detect damp, degradation and partial defect of insulation of electrical equipment. This method is widely used in electric manufacturing, electric equipment installation, connection and preventive test. Measurement on dielectric loss of transformer, mutual inductor, reactor, capacitor, bushing and arrester is the most basic method to test their insulation property.

CDEF fully-automatic anti-interference dielectric loss tester breaks through the traditional bridge testing method and adopts variable frequency power technology, single chip and modernized electrical technology to carry out automatic frequency shift, analog-to-digital conversion and data computing. It features strong anti-interference capacity, high test speed, high precision, automatic digitization and easy operation.It adopts high-power switching power supply, which outputs 45Hz and 55Hz pure sine wave and automatically increase the voltage to a maximum value 10 KV. It can filter 50Hz interference automatically, and it is applicable to the site test of substation and other places with large electromagnetic interference. This methods is extensively applied in dielectric loss measurement of transformer, mutual inductor, reactor, bushing, capacitor, arrester and others equipments in power industry.

Product Features:

1. The instrument adopts complex number current method to measure capacitance, dielectric loss and other parameters. The measured result is highly accurate and it is easy to realize automatic measurement.  

2. The instrument adopts variable frequency technology to eliminate 50Hz/60Hz power frequency interference. So a reliable data will be reachable even under the strong electromagnetic interference.  

3. The instrument adopts large screen LCD . In the process of testing, English menu prompt is visualized and easy to operate. 

4. The instrument is easy to operate and the measuring process is controlled by microprocessor. Once a suitable measuring method is selected, the data measurement will complete automatically under the control of microprocessor. 

5. The instrument is designed to be an integrated model with reference capacitor and HV power supply in it, enables site test measurement and reduces site wiring. 

7. The instrument is equipped with CVT testing function, which can achieve CVT self-exciting testing without external accessories and measure the capacitance and dielectric loss of C1 and C2 by at a time. 

8. GST measurement adopts ivddv technology and avoids unstable data provided by previous GST measurement. 

9. The instrument provides low voltage shell function of GST. When the bus of 220kV CVT is grounded, dielectric loss measurement can be conducted for C11 without removing 10 kV GST. 

10. The instrument has a function of measuring high-voltage dielectric loss. It can carry out dielectric loss test with over 10kV with the help of voltage transformer or series resonance. 

12. The instrument has a ground-fault protection function. In case that the instrument is not grounded or grounded incorrectly, the instrument will refuse to enter into normal procedure and output HV. As for the over-current protection function, it will protect the instrument from damage when the tested article is in a short circuit or breakdowns. 

13. The instrument has a function of electric shock protection. When the instrument operator suffers an electric shock due to incaution, the instrument will cut off the HV immediately and thus ensure the security of operator. 

Technical Parameter:

Testable parameters:

The instrument can test the following parameters and display them in figure:

Capacitance value of tested article CX is in pF or nF, 1nF=1,000pF. 

Dielectric loss value of tested article tgδ is displayed with %. 

Technical indicators:

Accuracy: Cx:±(reading×1%+1pF)

tgδ:±(reading×1%+0.00040)

Anti-interference: Variable frequency anti-interference, the above accuracy can be reached under 200% interference. 

Capacitance range: Internal HV: 3pF~60000pF/10kV 60pF~1μF/0.5kV

                                External HV: 3pF~1.5μF/10kV60pF~30μF/0.5kV

                                Resolution: Maximum 0.001pF, 4 valid figures. 

tgδ range:unlimited, 0.001% resolution, automatic identification for capacitance, inductance and resistance of three tested articles. 

Test current range: 10μA~1A

Internal HV: Set voltage range: 0.5~10kV

Maximum output current: 200mA

Buck-bust method: continuous stepless regulation 

Test frequency: 45, 50, 55 single frequency 

                          45/55Hz automatic dual variable frequency 

Frequency accuracy: ±0.01Hz

External HV: In case of UST, maximum test current is 1A, and power frequency or variable frequency is 40-70Hz

In case of GST, maximum test current is 10kV/1A, and power frequency or variable frequency is 40-70Hz

CVT self-exciting low voltage output: Output voltage 3~50V, output current 3~30A

Measuring duration: About 40s, depending on measuring method

Input power supply: 180V~270VAC, 50Hz/60Hz±1%, supplied by alternating current or generator 

Computer interface: Standard RS232 interface 

Printer: WH-A7 mini-type thermal printer 

Environment temperature: -10℃~50℃

Relative humidity: <90%

Overall dimension:460×360×350mm

Weight:28kg

Reliable packaging & Prompt shipping:

Raw materials on stock:

• Professional pre-sale model/configuration selection advise and technical support -- offered by experienced technician.
• Free on-site installation, debugging and technical training -- offered by strictly trained technology application engineers.

• The warranty period is 24 months from commissioning acceptance date on. After the warranty period is over we provide lifelong maintenance and technical service.
• We guarantee the maintenance time no more than 3 working days and response time within 1 hour.
• We build instrument service profile for our clients to record the product service and maintenance conditions.
• After instruments start service, we will pay follow-ups to collect the service conditions.

Chongqing TOP Tester Co.,LTD belongs to Chongqing TOP Group which is located at Chongqing city--a southwest electromechanical manufacturing center as well as national municipality. We are a sci-tech enterprise and integrate development, design and manufacture. TOP owns Chongqing TOP Oil Purifier Co.,LTD and Chongqing TOP Tester Co.,LTD, with experienced engineers who are long engaged in analysis instrument development and analysis application. 

Chongqing TOP Tester Co.,LTD mainly works on the development production, market, technical and after-sale service for petrochemical analyzers, transformer substation electrical testing equipment and circuit detecting equipment. Main products are trace water content testers, fully auto surface/interfacial tension testers, open/closed cup flash point testers, kinematic viscosity testers, oil acidity testers, air release value testers, multi-functional degassing oscillation instruments, dielectric loss testers, insulation oil dielectric strength testers, transformer characteristics comprehensive testers, relay protection testers, cable testers, high voltage testing equipment etc.

Contact info: