Test Equipment/ Oil Analyzer, buy DGA2013-1 Multi-functional Laboratory Transformer Oil Dissolved Gas Chromatograph Tester on China Suppliers Mobile

Product Details

Transformator Dissolved Gas in Oil Analysis Instrument/Dissolved Gas Chromatograph Tester DGA2013-1

Input voltage range	-2.5V ~ + 2.5V
Integral sensitivity	0.05uV • s
Minimum resolution	1uV
Sampling frequency	maximum 50 times / sec, program variable adjustable.

1.1Temperature control

① Temperature range

Column chamber: room temperature+15℃—399℃

Vaporizing chamber: room temperature+30℃—399℃

Conversion furnace :room temperature+30℃—399℃

Thermal conductivity detector: room temperature+30℃—399℃

Hydrogen flame detector :room temperature+30℃—399℃

② Temperature control precision: ±0.1℃

1.2 Thermal conductivity detector

① Sensitivity: minimum detectable concentration of hydrogen≥5μl/L

②Noise: ≤0.05mv

③Drift: ≤0.15mv/30min

1.3 Hydrogen flame detector

①Minimum detectable concentration of hydrocarbon≥5μl/L

②Minimum detectable concentration of CO、CO2≥5μl/L

③Noise: ≤0.05mv

④Drift: ≤0.15mv/30min

1.4 Whole machine start-up time: less than 3 hours

The analyzer adopts double-pillar parallel shunt system ,equipped with TCD, double FID and methane conversion oven, and could achieve total analysis of nine components(H2,O2,N2,CH4,C2H2,C2H4,C2H6,CO, CO2)of dissolved gas in insulation oil by one time.

The analyzer can be employed for internal fault detection of power system oil and gas equipment, cooling medium analysis of hydrogen-cooled generators, impurity analysis of sulfur hexafluoride, the boiler flue gas analysis, gas analysis and environmental monitoring analysis. Due to its employment not only for special analysis, but also for general analysis, the analyzer becomes the most effective gas analytical instrument in petroleum, chemical engineering, mining and other systems.

1. Applicable boiling range: petroleum products or distillates of 55~550℃ boiling range distribution such as fuel, kerosene,
diesel, lubricants, wax oil etc. On this chromatographic condition tested sample components can all show the peaks. It adopts area normalization method to fix quantity. It complies to SH/T 0558-2002 and ASTM D2887standard.

2. Applicable boiling range: crude oil of initial boiling point~538℃ boiling range distribution. Get distribution proportion of
fuel, diesel, kerosene, heavy oil. Since the heavy components above 538℃ can not show peak, it adopts incremental internal standard method and complies to ASTM D5307 standard.

3. Applicable boiling range: petroleum products or distillates of 55~680℃ boiling range distribution. On this chromatographic condition tested sample components can all show the peaks. It adopts area normalization method to fix quantity.

Characteristic

1 Computer-keyboard operation
This realizes five heating zone temperature control, detector control, over-temperature protection, "zero" degree protection, air break protection and other functions, so as to protect the chromatographic column and thermal conductivity rhenium tungsten filament most effectively.

2 Large-screen liquid crystal display It could display a large amount of information intuitively and clearly.

3 Advanced chromatography process
Based on only one injection and three-detectors analytical process, the analyzer greatly increases detection sensitivity of
hydrocarbon gas. Double hydrogen flame setting also reduces the detection impact caused by the gas content differences.

Chongqing TOP Oil Purifier Co., Ltd

Located at Chongqing city--a southwest electromechanical manufacturing center as well as national municipality, Chongqing TOP is a professional leading manufacturer and supplier of oil purifiers and various related testers. Our company consists of departments respectively for technological development, machinery manufacture, instrument manufacture and quality control etc.

* The warranty period is 24 months from commissioning acceptance date on. After the warranty period is over we provide lifelong maintenance and technical service.
* We guarantee the maintenance time no more than 3 working days and response time within 1 hour.
* We build instrument service profile for our clients to record the product service and maintenance conditions.
* After instruments start service, we will pay follow-ups to collect the service conditions.

MOQ	1 Set
Trade Terms	EXW, FOB, CIF, CFR
Payment Terms	T/T, L/C
Port of Loading	Any Port of China
Packing Method	Internaional Standard Wooden Case
Transportation Method	By Sea, By Land, By Air, By Express
Supply Capability	100 Sets/Month