Test Equipment/ Oil Analyzer, buy SD-0722 ASTM D6082 Standard Foam Oil Tester for Characteristics Analysis on China Suppliers Mobile

Product Details

Product Description

SD-0722 ASTM D6082 Standard Foam Testing Instrument for Characteristics Analysis

Application:

This SD-0722 High temperature lubricant foaming characteristics tester is applied for testing the lubricant foaming
characteristics at 150 ℃. Heat the sample to 49 ℃ and after 30min constant temperature cool it to room temperature. Then transfer the sample to a specified cylinder and heat it up to 150 ℃, inlet dry air into the metal diffusion head for 5min. Test the instantaneous static foam amount, kinetic foam amount before stopping air inlet, and static foam amount, foam disappearing time and total volume increase percentage within specific time after stopping air inlet.

Features:

1. Stainless steel heater;
2. High temperature resistant borosilicate glass cylinder, Φ300×450mm, meet standard requirements;
3. Quite precise flow meter, with needle valve, flow rate 0~94ml/min;
4. Air filter with glass wool;
5. Environmentally friendly oil bath heating to reduce harm of oily fume to human body, with highly efficient heat insulation
effect;
6. Microprocessor thermostat and PID control, digital display of temperature with accuracy 0.1 ℃, Pt100 RTD temperature probe;
7. Working temperature range: room temperature ~ 150°C, with safety measures to prevent overheating or low liquid level.

Technical Parameters

1. Applicable standards: ASTM D6082 SH/T0722
2. Temperature control accuracy: ± 0.1 ℃
3. Heating method: oil bath heating
4. Total power: 2.5KW
5. Working units: 2 units
6. Flow control: Precision flow meter
7. Power supply: AC220V / 50Hz
8. Temperature range: 150 ± 0.1 ℃
9. Temperature control mode: imported PID digital temperature controller

Related Products

1. Water Content Tester TP-2100

2. Digital Karl Fischer Water Content Tester TP-6A

3. Kinematic Viscosity Tester VST-2000

4. Kinematic Viscosity Tester TPV-8

5. Kinematic Viscosity Tester VST-3000

6. Fully Automatic Oil Acidity Tester (6 cups) ACD-3000I

7. Automatic Surface/Interface Tension Tester IT-800

8. Automatic Open Cup Flash Point Tester TPO-3000

9.Closed Cup Flash Point Tester TPC-3000

10.Digital Open Cup Flash Point Tester TPO-100

11.Digital Closed Cup Flash Point Tester TPC-100

12.Cloud Point & Pour Point Tester PT-2000

13.Multi-functional Vibration Tester VBT-2000

14.Automatic Potentiometric Titrator TP668

15.Petroleum Products Density Tester DST-3000

16.Karl Fischer Volumetric Water Content Titrator TPD

17.Distillation Range Tester DIL-201

18.Online Oil Quality Tester PTT-002

19.Copper Corrosion Tester TP-113

20.Dew Point Tester DPME-P

Company Introduction

Chongqing TOP Oil Purifier Co.,Ltd, established in 2 0 1 2 , is a professional manufacturer engaged in the research, development, production, sale and service of oil purifiers and various related testers.We are located in Chongqing China - a southwest electromechanical manufacturing center as well as national municipality, which is one of the most well-known oil purifier manufacturers in southwest China. Dedicated to strict quality control and thoughtful customer service, our experienced staff are always available to discuss your requirements and ensure full customer satisfaction. On basis of mature development and manufacture technology and highly qualified production management team, the products own high quality, easy operation, excellent performance and long service life. In addition, Our company has won C E,S G S certificates. Selling well in all cities and provinces around China, our products are also exported to clients in such countries and regions as Australia, Canada, USA, South Africa , Asia etc.. Our company holds the managerial idea that “ Honest treatment,Sincere Communication,Reliable Quality and Service Commitment”, and tries its best to do well at any aspect from each part, each point of procedure of manufacturing to final inspection, packing and shipment. We also welcome O E M and O D M orders. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements.

TOP Oil Purifiers are widespread in the fields of electric power, petrifaction, mineral, shipbuilding, steel construction, bridge, automobile and railway, playing a great role in reducing energy consumption for clients as well as environmental pollution. We provides you with reliable oil purifiers such as transformer oil purifier, turbine oil purification machine, hydraulic oil purifier, lubricating oil filtration machine, fuel oil restoration, oil and water separator, oil regeneration equipment, waste oil recycling equipment etc.

TOP Testers works on the development, production, market, technical and after-sale service for petrochemical analyzers, transformer substation electrical testing equipment and circuit detecting equipment. Main products are water content testers, surface/interfacial tension testers, flash point testers, kinematic viscosity testers, oil acidity testers, insulation oil dielectric strength testers, transformer characteristics testers, relay protection testers, high voltage testing equipment etc.

Honest Team - TOP always honestly treat you and keep faith to make you satisfied with every cooperation with us.
Sincere Communication - TOP sincerely communicate with you to guarantee the provided products to be your ideal ones.
Reliable Quality -TOP own high quality and high performance for every TOP product is under strict quality control and testing.
Service Commitment - TOP bring you prompt, considerate and professional aftersale service and technical support, and explore technology future together.

Packing&Shipping

Payment terms

MOQ	1 Set
Trade Terms	EXW, FOB, CIF, CFR
Payment Terms	T/T, L/C
Port of Loading	Any Port of China
Packing Method	Internaional Standard Wooden Case
Transportation Method	By Sea, By Land, By Air, By Express
Supply Capability	100 Sets/Month

After Sales Service

* The warranty period is 24 months from commissioning acceptance date on. After the warranty period is over we provide lifelong
maintenance and technical service.
* We guarantee the maintenance time no more than 3 working days and response time within 1 hour.
* We build instrument service profile for our clients to record the product service and maintenance conditions.
* After instruments start service, we will pay follow-ups to collect the service conditions.

What is the mini order quantity?
MOQ: generally 1 unit/piece/set

What payment methods are supported?
Payment method: By T/T, L/C, Alibaba Trade Assurance etc.
Payment terms: Generally, T/T 40% advanced, the balance paid by T/T when the machine is ready; or 100% irrevocable L/C at sight.

What are the available delivery methods?
Our port location: Chongqing, Shanghai or other main port of China
Delivering to: Worldwide
Delivering method: by sea, by air, by truck, by express, combined transportation

How long is the product date of delivery probably?
Delivery date differs with product type, order quantity, special requirement etc. Usually our big machine delivery date is around 10 ~ 20 days; test equipment or analyzer delivery date is around 5~10 days. Some products have stock, contact us anytime to get more information.

How long is the warranty period?
We warrants the plant supplied under agreed specification against defects in material and workmanship under normal use and service for a period of 2 years after start up of the system.

How is the technical services on the product?
Engineer available to service machinery overseas. If you have any technical question, you are welcome to contact us any time. We will response promptly and answer to your satisfaction. If required and necessary, we can send our engineer to your place to provide technical support.