Melt Flow Index Tester introduction
Melt flow index extrusion plastometer applies to both molten high temperature of the PE, gather fang PSF, fluorine plastic, nylon engineering plastic, also suitable for polyethylene, polypropylene polystyrene, ABS resin, pom resins melting temperature lower plastic tests.
Meet Sstandards:
GB/T3682-2000,ISO 1133:1997,ASTM D1238
Hongjin Melt Flow Index Tester Features:
1. Color LCD display in Chinese and English
2. Hand automatic cutting material integration
3. Double temperature control system, the temperature control accuracy is more precise, and the heating efficiency is higher
4. Double imported sensors, the upper and lower temperature gradients are more accurate, and can be used independently to increase the service life
5. The barrel is made of imported Hastelloy nitriding, the die is made of carbon tungsten steel, the material is solid
5. Insulation barrel is made of all sus304 stainless steel, which will not rust at high temperature
6. Automatically calculate the result and print it out
Technical Parameters
| Temperature range | 0℃-450℃ |
| Temperature fluctuation | ±0.2℃ |
| Temperature uniformity | ±1℃ |
| Temperature display resolution | 0.1℃ |
| Time display resolution | 0.1S |
| Displacement accuracy | 0.001mm |
| olume timing | 0.001S |
| Test result range | 50-5000cm³/10min |
| Barrel diameter | Φ2.095±0.005mm |
| Length of outlet | 8.000±0.025mm |
| Loading barrel diameter | Φ9.550±0.025mm |
| Weight accuracy | ±0.5% |
| Output method | micro automatic printout |
| Cutting method | manual and automatic cutting |
| Test load | full set of eight-level weights |
| Power supply voltage | AC220V±10% 50HZ |
