Product Overview
Product Introduction:
used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, which is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm.
PRODUCT SPECIFICATIONS
model | TH-80(A~F) | TH-150(A~ F) | TH-225(A~F) | TH-408(A~F) | TH-800(A~ F) | TH-1000(A~F) |
Internal size W x H x D(cm) | 40x50x40 | 50 x 60 x 50 | 60 x 75 x 50 | 80 x 85 x60 | 100x100x80 | 100x100x100 |
External dimensions W x H x D(cm) | 120x165x115 | 130x170x125 | 140x185x130 | 165x195x155 | 185x200x175 | 190x210x185 |
Weight (approximately) | 150KG | 180KG | 250KG | 350KG | 500KG | 520KG |
temperature range | Low temperature: A: +25 °CB: 0°C, C: -20°C, D: -40°C, E: -60°C, F: -70°C) High temperature: 100°C (150°C ) |
Humidity range | 20%~98% R.H. (10%~98%R.H); (5%~98%R.H is a special selection condition) |
Temperature and humidity analysis accuracy/distribution accuracy | 0.1°C 0.1%R.H./±2.0℃ ±3.0%R.H. |
Temperature and humidity control accuracy | ±0.5°C, ±2.5%R.H. |
Heating/cooling time | Warming up about 4.0°C/min; cooling down about 1.0°C/min |
Internal and external materials | The inner and outer boxes are made of SUS304# stainless steel plate (baking paint is optional) |
Insulation material | High temperature resistant high density ethyl chloroformate foam insulator material |
cooling system | Air-cooled/single-stage compressor (-20°C); two-stage compressor (-40°C-70°C) |
Safety protection device | Fuseless switch, compressor overload protection, refrigerant high and low pressure protection, ultra-humidity and over-temperature protection, fuse, fault warning system, water shortage alarm protection |
Accessories | Operation hole built-in glass door (optional), recorder (optional), viewing window, 50mm test hole, PL box light, partition, dry and wet ball gauze, casters, horizontal tripod |
power supply | AC220V50/60Hz & 1∮ AC380V50/60Hz3∮ |
Standard test
GB/T 2423.2-2001 Test B: High temperature test method
GJB 150.3-1986 high temperature test
IEC68-2-2 Test B: Dry heat. GB 11158 "Technical Conditions of High Temperature Test Chamber"
GB10586-1 "Technical Conditions of Humidity and Heat Test Chamber"
GB/T 2423.2 "Basic environmental testing procedures for electrical and electronic products, Test B: High-temperature test methods".
GB/T 2423.3 "Basic Environmental Test Procedures for Electrical and Electronic Products Test Ca: Constant Humidity and Heat Test Method". etc...
FEATURES AT A GLANCE
SIMILAR PRODUCTS
About our company
Hongjin Testing Instrument Company is a professional manufacturer of various testing equipment for more than 14 years. Hongjin instruments are widely used in paper products, color printing packaging, ink printing, tape, bags, shoes, leather products, environment, toys, baby products, food, hardware, electronic cables, plastic products, rubber products, household appliances, and other industries , And apply to all scientific research units, quality inspection institutions and universities.
Successful Project
Clean the machine first, and then package with film paper and foam paper. It is best to export wooden boxes according to the size
FAQ
FAQ
1. Are your company a trading one or a factory?
Factory ,14 years focusing on test instruments field,5 years exporting experience.Our factory is in Dongguan, Guangdong, China
2. Do you offer after-sales service? How can I ask for that? And how about the warranty?
Every machine from our factory has a 12-month warranty after shipment. Generally,
we offer 12 months for the FREE maintenance, while considering of sea transportation,
If your machine doesn’t work, you can send E-mail to us and we will try our best to find
the problem by email or skype video chat if neccesary. After confirmation of the problem,
we can send you new spare parts or provide on-site repair.
3. What’s the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery
time is 7-20 working days after deposit receipt. If you are in urgent need, we can consider
making a special arrangement for you.
4. Do you accept customization service? Can I have my logo on the machine?
Yes, of course. We can not only offer standard machines, but also customized
machines according to your requirements. And we can also put your logo on the machine.
5. Do you have a branch company or service office in my country?
We have offices in the belowing:
Hangzhou Branch:
Address: Building 1, Haixiang Industrial Park,Moqianshan Road, Xiangfu Town, Gongshu District, Hangzhou, Zhejiang, China
6. How to install and use the product?
We will send you operating instructions, English video by Email. Or you can download on our
officail website directly.
Most of our machine is shipped with a whole part, which means it is already installed, all you
need to do is to connect the power cable and start to use. And if possible, we can also install
your machine at site.
7. What about the services and product' quality?
Service: ,Design service,Buyer lable service.
Quality: Each instruments must be carried out 100% quality examination and test, the finished products must through a third party
calibration institutions before shipping and delivery goods.