Measurement Use Styli, buy CMM Probe M2 Ruby Ball Stylus With Tungsten Carbide Stem on China Suppliers Mobile

Product Details

Product Description

Ruby ball stylus(Tungsten carbide stem)

Specification

Thread Size	Stem Material	Ball Material	(A) Ball Diameter	(B)Overall Length	(D) Effective Work Length	(C) Stem diameter	Order No.
M2	Tungsten carbide	Ruby	0.5	10	3	0.4	BV-M2-10T-005R-7805
		Tungsten carbide	Ruby	0.7	10	4	0.5	BV-M2-10T-007R-7801
		Tungsten carbide	Ruby	1.0	10	4	0.7	BV-M2-10T-01R-1325
		Tungsten carbide	Ruby	1.0	20	7	0.7	BV-M2-20T-01R-7808
		Tungsten carbide	Ruby	0.5	20	7	0.3	BV-M2-20T-005R-1345
		Tungsten carbide	Ruby	0.7	20	12	0.5	BV-M2-20T-007R-0577
		Tungsten carbide	Ruby	1.0	20	12.5	0.8	BV-M2-20T-01R-0033
		Tungsten carbide	Ruby	1.5	20	12.5	1.0	BV-M2-20T-015R-0034
		Tungsten carbide	Ruby	2.0	20	14	1.0	BV-M2-20T-02R-3822
		Tungsten carbide	Ruby	2.5	20	15.4	1.0	BV-M2-20T-025R-1896
		Tungsten carbide	Ruby	3.0	20	17	1.5	BV-M2-20T-03R-0938
		Tungsten carbide	Ruby	4.0	20	22	2.0	BV-M2-20T-04R-1029
		Tungsten carbide	Ruby	5.0	20	20	2.5	BV-M2-20T-05R-0046
		Tungsten carbide	Ruby	1.0	30	20.5	0.7	BV-M2-30T-01R-8663
		Tungsten carbide	Ruby	1.5	30	22.5	1.0	BV-M2-30T-015R-0035
		Tungsten carbide	Ruby	2.0	30	22.5	1.5	BV-M2-30T-02R-0036
		Tungsten carbide	Ruby	2.5	30	22.5	2.0	BV-M2-30T-025R-0038
		Tungsten carbide	Ruby	3.0	30	27	2.0	BV-M2-30T-03R-0040
		Tungsten carbide	Ruby	4.0	30	30	2.0	BV-M2-30T-04R-0043
		Tungsten carbide	Ruby	5.0	30	30	2.5	BV-M2-30T-05R-0047
		Tungsten carbide	Ruby	2.0	40	32.5	1.5	BV-M2-40T-02R-0037
		Tungsten carbide	Ruby	2.5	40	37	2.0	BV-M2-40T-025R-0039
		Tungsten carbide	Ruby	3.0	40	37	2.0	BV-M2-40T-03R-0041
		Tungsten carbide	Ruby	4.0	40	40	2.0	BV-M2-40T-04R-0044
		Tungsten carbide	Ruby	5.0	40	40.25	2.5	BV-M2-40T-05R-0048
		Tungsten carbide	Ruby	3.0	50	47	2.0	BV-M2-50T-03R-0042
		Tungsten carbide	Ruby	4.0	50	50	2.0	BV-M2-50T-04R-0045
		Tungsten carbide	Ruby	5.0	50	50	2.5	BV-M2-50T-05R-0049

Select And Use Styli

SELECT

-- Be very careful when selecting styli to ensure the most suitable measurement for your application.Selecting a stylus always involves connecting threads on the CMM sensor,typically M2,M3,M4,M5 threads.The geometry of the workpiece determines the choice of the stylus assembly.The stylus must be easily accessible to all measuring points of the workpiece,enabling it to achieve the required measurement standards and measurement capabilities for each measured feature.

-- A comprehensive measurement of the workpiece on a CMM with a fixed sensor usually requires a lot of styli,which are mounted in different directions and requires a lot of styli, which are mounted different directions and require differently shaped stylus assemblies,extensions and joints.The combination of all these components is called the stylus configuration and is mounted on the adapter block.

-- The stylus is very flexible to use with a threaded adapter.For example,you can use the M2/M3/M4 stylus on the M5 sensor connection thread.

USE :To maintain the accuracy of the touch point,we recommend you that:

1.Try to use short stylus The smaller the bending or deformation of the probe, the higher the accuracy.Using the shortest possible stylus is the best choice for you.

2.Minimize joints
Each additional stylus is connected to the extension stem to add a potential bend and deformation point.Minimize the number of
stylus assemblies in our application.

3.The diameter of the selected ball should be as large as possible This increases the
distance between the ball/stem and reduces false triggers caused by the impact bar.The larger the diameter of the ball, the less
affected by the surface finish of the workpiece being tested.

Ball Material

>Ruby For most measurement applications, ruby is one of the hardest materials found in ball gauges with industry standard and best characteristics. The artificial ruby is an alumina crystal (corundum) having a purity of 99% sintered at 2000°C by the Vemeuil process. Then the corundum is cut and gradually processed into high-precision ball. The surface of ruby ball is extremely smooth, with high compressive strength and high mechanical wear resistance.

>Silicon nitride Silicon nitride possesses many similar properties to ruby. It is a very hard and wear-resistant ceramic which can be machined into very high precision spheres. It can also be polished to an extremely smooth surface finish. Silicon nitride does not have the attraction to aluminium and so does not exhibit the adhesive wear seen with ruby in similar applications. However, silicon nitride does show significant abrasive wear characteristics when scanning on steel surfaces and so its applications are best confined to aluminium.

>Zirconia Zirconia is a particularly tough ceramic material with hardness and wear characteristics approaching those of ruby. Its surface properties make it an ideal material for aggressive scanning applications on cast iron components.

>Tungsten carbide Tungsten carbide is a compound composed of tungsten and carbon. It has a metallic luster and a hardness similar to that of diamond. It is a good conductor for electricity and heat.Tungsten carbide styli is ideal for applications where the contact points of the workpiece being tested have extremely high wear requirements.

Stem material

>Stainless steel Stems made of stainless steel are widely used for measuring styli with a ball/tip diameter of 2 mm or more and a maximum length of 30 mm. Within this range, the integral steel bar provides the optimum stiffness to weight ratio, with a joint between the stem and the threaded body that provides sufficient ball/stem clearance without reducing stiffness. >Tungsten carbide For small diameter stems or short stems (lengths up to 50 mm) that require greater rigidity, tungsten carbide is the best choice. Small diameter stems can be used to measure styli with a ball diameter of 1 mm or less. In addition, the weight of the pole will have a negative impact, and the rigidity may also be reduced due to the possible deflection of the joint between the stem and the body.

>Ceramics For stems with a ball diameter bigger than 3 mm and a length more than 30 mm, the ceramic stem has a stiffness which similar to that of a steel stem, but is much lighter than a tungsten carbide stem. When the stylus with the ceramic stem is broken due to the collision, the test has additional collision protection for the probe. >Carbon fiber Carbon fiber materials come in a variety of grades. The materials used by UNIMETRO provide optimum stiffness characteristics under tensile and twisting conditions and are extremely low in weight. Carbon fiber is an inert material that combines with a special resin matrix to provide excellent protection in most extremely harsh machine environments. For stems longer than 50mm, Bevy is the ideal material for the highest rigidity and extremely light weight It is the best stem material for high-precision strain gauge probes with excellent vibration damping and a negligible coefficient of thermal expansion.

AFTRE-SALES SERVICE

24 month warranty
30 minute quick response

7 x 24-hour online customer service
Online video service
Telephone hotline
Technician one-to-one service

L/C letter of credit

D/A documents against acceptance

D/P Documents against Payment

T/T Telegraphic Transfer

Western union

Money gram

ABOUT US

Dongguan UNIMETRO Precision Machinery Co., Ltd

Dongguan UNIMETRO Precision Machinery Co., Ltd is a professional supplier of metrology products with 9 years experience. We devote ourselves to developing, assembling, and sales of vision measurement machines, tools inspection machines, metrology accessories and special metrology fixtures. Also we are integrating the best metrology resources in the world and have built a mature supply chain for other metrology equipment and products. The UNIMETRO products have been sold to more than 20 countries and regions, and contribute our service and support to different customers in different industries such as mold, plastic injection, electronics, semi conductor, aviation and automotive. UNIMETRO has the leading advantage of outstanding R&D capability and detailed oriented production process. We have got more than 15 patents for our products and we will always keep the leading position of innovation in the metrology industry. Professional, sincere, responsibility, and honest are the key characters of the UNIMETRO people. And we are always expecting long term cooperation with you! UNIMETRO will always offer our best support and resources to our partners!

CLIENT & AGENT

FAQ

Q: Are you a factory or trading company ? A: We are a factory and giving you the quickest reply in 24 hours.

Q: What's your company mainly in?

A: We are mainly produce Vision measuring machine,Coordinate measuring machine ,CMM&VMM fixturesetc.

Q: How to Choose the Appropriate Specification?

A: As long as you tell us variety and size of product to be measured, our professional team would advise you of measuring
instrument of suitable specifications.

Q: Do you accept customized service?

A: Be sure! We can provide not only typical machines, but also the machines customized to customer's needs.

Q: What is your warranty period?

A: Our product warranty period is one year. Our product quality is very stable, and we have improved a lot on some breakable parts. You can rest assured of our product quality.