Air filter, buy Machine oil filter for hydraulic WU-40 (80 100 180um) on China Suppliers Mobile

Product Details

Product introduction

WU series

GY-Filters hydraulic cartridges are built to provide superior protection from particles and contamination that can result in inefficiency, downtime, and excessive repair costs. Proper fluid cleanliness levels are critical for components in the hydraulic fluid stream. Types of filtration media used depend on the application. GY Filters use microglass media, stainless steel mesh, or paper media. Micron ratings range from 250 microns down to 1 micron. These hydraulic cartridges are essential to extending component lifecycles and reducing operating expenses.

wire netting

Harsh operating environments require robust materials of construction in order to operate as needed. Whether your application involves extreme environments such as high operating and differential pressures, extreme temperatures, or fluids with compatibility needs, materials of construction is vital to ensure your system is protected.

wire netting

Woven wire mesh is a surface filtration media that removes particulate by stopping it at the surface of the filter media. Unlike its depth filtration based counterparts, woven wire mesh has a known appature size based on the weave selected giving the mesh an "absolute" micron rating. Wire mesh is most commonly manufactured out of 304 or 316 CRES, however, other materials may be used based on application.

A wide range of filter media is available including:

Woven wire mesh can be formed to many sizes and shapes to allow for different flow dynamics. Woven wire mesh elements operate using surface filtration which captures 100% of particles at a given micron rating. Surface based filtration allows for easy cleaning by back flushing the elements. Since particulate is not embedded in the element, regular cleaning will extend the service life of the elements.

Specification

For the convenience of your selection and purchase, the above is the introduction of the product and size.

TECHNICAL DATA

MODEL	PATH(MM)	NOMINAL FLOW-RATE	ORIGINAL PRESSURE	FILTER REMOVAL RATING(UM)	BY-PASS VALVE SETTING	CONNECTING
WU-16X*-J	12	16	≤0.01	80 100 180	/	TUBE TYPE
WU-25X*-J	15	25					0.02
WU-40X*-J	20	40
WU-63X*-J	25	63
WU-100X*-J	32	100
WU-160X*-J	40	160
WU-225X*G-J	50	225
WU-250X*F-J	50	250						FACE PLATE COUPING
WU-400X*F-J	65	400
WU-630X*F-J	85	630
WU-800X*G-J	63	800						TUBE TYPE
WU-1000X*G-J	76	1000						TUBE TYPE

FAQ

Q1：Tpayment term
By T/T, 30% as deposit, the balance should be paid before shipment.

Q2;Production time

10days as 1st order, repeat order 7days