Product introduction ※

Bochuang spacetime bcsk-808m2 mobile phone signal shield is a high-tech product carefully developed by our factory using foreign advanced technology, aiming at the continuous development of communication system and according to the actual situation of foreign mobile communication. It can cut off GSM / CDMA / AMPS / DCS / PHS / 3G (WCDMA, TD-SCDMA and CDMA2000) within a radius of 1-25m (about 10-250m2, and the shielding range can be adjusted according to the required place) And 4G mobile phone signal, 2.4G wireless signal, so that the mobile phone can not send and answer, and can not send or receive short messages, but will not interfere with the work of other electronic devices, so as to ensure the safety of the required place. When the mobile phone leaves the partition range, it can resume normal use without any damage to people.

※ product features ※

1. Effectively shield all communication signals such as CDMA (China Telecom), GSM (China Mobile, China Unicom), SCDMA (Netcom, PHS), DCS (1800MHz), PCS (1900MHz), PHS (Telecom PHS), 3G mobile phone signals and 4G mobile phone signals,

2. Ultra thin shell, the surface can be labeled or silk screen printed according to customers' needs (silk screen printing service is provided free of charge)

3. Transmission Power 12W

4, effective shielding distance 1-25 meters adjustable (before commissioning)

※ applicable place ※

All places

※ after sales service ※

Guaranteed repair within one year

※ performance index ※

Serial number   technical standard   technical parameter

one   CDMA band transmission frequency   869-894MHz

two   DCS / PHS frequency band transmission frequency   1800-1920MHz

three   GSM band transmission frequency   925-965MHz

four   TD-SCDMA band transmission frequency   2005-2035MHz

five   WCDMA / CDMA2000 band transmission frequency   2110-2175MHz

six   2.4G band transmission frequency   2400-2500MHz

seven   4G1 band transmission frequency   2300-2390MHz

eight   4G2 band transmission frequency   2550-2660MHz

nine   Power Supply   Power input ac160v-240v output DC 5V 15A

ten   size   350(L) × 110(W) × 37(H)

eleven   weight   About 2000 g

twelve   Isolation range   1-25m (about 10-250m2, the shielding range can be adjusted according to the required place)

thirteen   Actionable type   All mobile phones (2G + 3G + 4G) 2.4G wireless signals, etc

fourteen   Use ring

Environmental conditions   temperature  - 10 to –55℃

relative humidity   ≤90%(RH)

atmospheric pressure   86-106kPa

position   Indoor and outdoor

※ installation instructions ※

This product can be directly fixed on the wall or ceiling with screws. The surface temperature of this product can reach 50 ℃, so please stay away from low heat resistant objects.

Installation height: 1.0-2.0m, the best effect

Installation direction: do not point the antenna of the mobile phone signal shield towards the mobile phone base station, otherwise the use effect will be affected.

1) . antenna connection

The antenna adopts error proof design and can be inserted and installed only when it is correct. (Note: If you turn on the power switch without installing the antenna, the unit may be damaged)

2) . power connection

Check the power switch of the host, confirm that the power switch is in the off position, insert the output plug of the power transformer into the power socket in the middle of the left side of the host, and connect the input plug of the power transformer with the AC220V power supply.