Suction Box Cover & Dewatering Component for Paper & Pulp Manufacturing, which are are made of UHMWPE and HDPE material, which widely sued in paper industry. UHMWPE and HDPE plastic dewatering element is known for its high dry-film lubricant content. This produces an extremely smooth surface, most importantly resulting in a low friction coefficient a low level of adhesion. 

3-200mm Different colors of UHMWPE dehydration element suction box cover filter plate

 

Technical Parameters of 

Property	Unit	Value
Density	g/cm3	0.93-0.96
Average molecular weight	g/mol	3million- 10 million
Tensile strength (23°C in air)	MPa	22
Breaking strength	MPa	42
Tensile strain at break	%	600
Charpy impact strength (notched)	mJ/mm2	No break
Ball indentation hardness	N/mm2	42
Shore D hardness	--	65-70
Abrasion	%	70-80, steel = 100
Static Friction Coefficient	--	≤0.16
Kinetic Friction Coefficient	--	≤0.10
Water Absorption	--	NIL
Elongation at break at 23 degress	%	≥300
Temperature resistance	°C	-269 to +85
Melt Temperature	°C	130-140

Besides the UHMWPE suction box cover, there are lots of other machined parts we have produced, juse like guide rail, roller, pulley,  bearing, bushing, washer, gear, wheel,  sleeve and so on. Please just send your drawing, or tell your requirements to us, then leave the rest to us !

 

Q1. Are you manufacturer?

A1. Yes, we engaged in engineering plastic more than 20 years, like UHMWPE, HDPE, PP, POM and so on.

 

Q2. How long is your delivery date?

A2. Generally within 20 days, it actual based on the quantity and manufacturing diffculties. 

 

Q3. Do you provide samples ? is it free or extra ?

A3. Yes, the samples can be free, you just pay the freight.

 

Q4. Do you support OEM, design or installation?

A4. Yes, we have machined many of irregular parts based on drawing, and we have a specialized team provide be responsible for the comprehensive service like research, design, inspection, installation, etc.

 

Q5. How about your quality control?

A5. Our QC&QA team will start inspection pre-prouct about the material,  the processing during produce and after finished. Finally we will release a report to our clients.

 

Q6.  Is there any warranty on the quality of your products?

A6. Yes, it based on what kinds of products and where you will used, most over than 1 year, some items warranty up to 10 - 20 years. 

 

Q7.  Do you support discount?

A7. It based on the quantity,  volume discounts available for large commercial orders.

 

Q8.  What is your terms of payment ?

A8. It is  flexible, we accept T/T,L/C,Paypal and the other terms.Open to discuss.