UHMWPE Sheet

Name: Ultra High Molecular Weight Polyethylene

Color: White, Black,Blue,Green, other color can be customized.

Size:1270~4270mm, 1055~4300mm,2040~3150mm.   Thickness:6.5mm-150mm

 

 

I. Description

UHMW-PE is a super engineering plastic that is probably not as well known as some other engineering plastics but can out perform its relatives in a number of     important areas. UHMW (aka UHMW-PE) offers a combination of excellent properties outstanding abrasion resistance, superior impact resistance, non-sticking and       self-lubricating properties and excellent mechanical properties, even in cryogenic    conditions. UHMW product reduces noise from impact & vibration. It is a      self-lubricating material that is chemical, corrosion, and wear-resistant. And its food safe. The weight is light, the  is 1/8 of the rolled steel. Life is higher than steel. The wear resistance is 3 to 7 times of carbon steel and stainless steel.

 

II. UHMWPE Characteristics

1. UHMW exhibits virtually no water absorption

2, Non-Toxic

3. Low coefficient of friction

4. Corrosion resistant

5. Abrasion and impact resistant

6. Wear Resistant

7. Great liner material for industrial material handling applications

8. no  ,food safe

 

III. UHMWPE Application

1.  Chemical Engineering: Corrosion and wear resistantance mechanical parts

2.  Thermal power: coal handling, storage of coal, warehousing chute lining

3.  Coal processing: sieve plate, filter, U-underground coal chute

4.  Concrete: cement raw and finished product silo silo lining

5.  Grain: food storage or chute lining

6.  Mining: sieve plate, chute linings, wear anti-bonding part

7.  Food industry: star-shaped wheel, transmission timing bottle screw, bearings, guide
rollers, guides, slide blocks, etc.

 IV. UHMWPE Certificate

 

. UHMW-PE Data Sheet

 

UHMWPE Typical Properties

Specific Gravity, 73°F	.944
Tensile Strength @ Yield, 73°F	3250	psi
Tensile Modulus of Elasticity, 73°F	155,900	psi
Tensile Elongation (at break), 73°F	330	%
Flexural Modulus of Elasticity	107,900	psi
Compresive Strength at 2% deformation	400	psi
Compressive Strength 10% Deformation	1200	psi
Deformation Under Load	6-8	%
Compressive Modulus of Elasticity, 73°F	69,650	psi
Hardness, Durometer (Shore "D" scale)	69
Izod Impact, Notched @ 73°F	30	ft.lbs./in. of notch
Coefficient of Friction (Dry vs Steel) Static	.17
Coefficient of Friction (Dry vs Steel) Dynamic	.14
Sand Wheel Wear/Abrasion Test	95	UHMW=100
Coefficient of Linear Thermal Expansion	11.0	in/in/°F x 10-5
Melting Point (Crystaline Peak)	279-289	°F
Volume Resistivity	>1015	ohm-cm
Surface Resistivity	>1015	ohm-cm
Water Absorption, Immersion 24 Hours	Nil	%
Water Absorption, Immersion Saturation	Nil	%
Machinability Rating	5	1 = easy, 10 = difficult
Sheet Thickness Availability (Off the Shelf)	.250 - 2.0	inches