FOSC-002 can be used to connect and branch fibers in aerial locations, ducted applications, direct buried
manholes. The case body is made from high-intensity engineering plastics PC and formed the shape with mold
plastics under high pressures. High mechanical intensity, corrosive-resistance, anti-thunderstruck and long
service life.

Specifications

Applications:

Optical networks

Local area networks

Wide area network

Features:

1. Four cable ports, two on each side. Easy reentry and re-closure. Compatible with most cable construction
    (loose tube, central core, and slotted core). Fast and easy installation.
2. A good mechanical property and resistance to weathering, firm and wearable.
3. The case body is made from high-intensity engineering plastics and formed the shape with mold plastics
    under high pressures. High mechanical intensity, corrosive-resistance, anti-thunderstruck and long service life.
4. Outer metal component and fixing unit are made of stainless steel, so it can be repeatedly used in different.
5. 4 inlets and 4 outlets.
6. Shape no defect,color uniform Residual fiber length no less than 1.6m ,Residual fiber curvature Radius no
    less than 30mm.Electnic connecting or shut off section in the box,ground lead-out section on the externl shell.
7. Charged with air which pressure is 60KPa±5KPa+65℃,20℃-40℃,2h10cycles,Allow air pressure change
    5KPa,immersed in the water for 15min,no air escape,air pressure change is 4KPs.
8. Soaked into the water which is 1.5m deep for 24h,Insulated resistance≥2×104MΩ,Between two metal
    sections 1×106MΩ,Betwwen metal section and ground 1×106MΩ.
9. Soaked into the water which is 1.5m deep for 24h,DC 15KV holding 1min,No breakage,no electric arc.
10. Charged with air which pressure is 100KPa±5KPa immersed in the water for 15min,no air bubble
     scape;After remove for 24hr,air pressure keeps unchanged.
11. Repeat Seal performance 3 times,no air bubble escape;After remove for 24hr,air pressure keeps unchanged.
12. For 800N axis strength Charged with air which pressure is 60KPa±5KPa,last 1 min,air pressure keeps
    Unchanged.
13. For 2000N/100mm,crush force,Charged with air which pressure is 60KPa±5KPa,last 1 min,air pressure
    keeps unchanged.
14. 16N·m,Charged with air which pressure is 60KPa±5KPa,air pressure keeps unchanged.
15. 150N,±45°,10cycles,Charged with air which pressure is 60KPa±5KPa,air pressure keeps unchanged.
16. 50N,±90°,10cycles,Charged with air which pressure is 60KPa±5KPa,air pressure keeps unchanged.