Used oil to Base Oil Distillation Plant, buy High Recovery Rate Automation Oil Recycling Plant For Used Engine Oil Recycle on China Suppliers Mobile

Product Details

Product Description

High Recovery Rate Automation Oil Recycling Plant For Used Engine Oil Recycle

Product Display

Application

Waste oil usually collected from machinery, vehicles, ships etc. which color is black and very dirty. Because the waste oil contains too much contamination, including non-hydrocarbon, alkene, polycyclic aromatic hydrocarbon, metal hydronium, impurities, metal particles, asphaltene and colloid etc. thereby it is harmful for the lubricating system and car engine etc, waste oil lost it’s control friction which have to be replaced. Transitional way to recycling the waste oil is by acid way, which will produces much waste sludge, bad smell, non-friendly environment, and the produced base oil is not purity, and it is easily oxidized. Many countries forbid the acid way. So our company researches the new waste oil vacuum distilling machine (JZC waste oil distillation machine), it is special for distilling and regenerating the black waste lube oil, including waste engine oil, lube oil, hydraulic oil, gear oil, dirty diesel oil, mixed oils etc. This equipment adopts physicochemical way to polymerize, passivity, absorb, eliminate impurities and harmful contaminations. JZC waste oil distillation machine heat the waste oil to (from 110℃ to 350℃) different temperature under high vacuum condition, making Hydrocarbon molecules break out, and re-order combination, forming diesel oil, lubricating base oil etc. JZC machine is very suitable for the small oil refinery company, also for the small oil company who want to make the oil by self.

Advantage

◆ Safety design, during the working process, raw materials oil is always flowing and flashing between the distillation tank and heating system, there is no any coking happen in the pipes and tanks, so the system is 100% safety, and long life time. ◆ There are optional ways to heat the oil, like the boiler way by using fuel, natural gas or coal. Also, if machine is small capacity, we can use the electric heating way. ◆ By using the high vacuum distilling way, so the distilling temperature is low, energy saving and safety. ◆ Using the special chemicals to catalyze the waste oil, which makes sure the final diesel oil, gasoline oil and base oil are good anti-oxidation with good color, there is no bad odor. The final oil can be storage for one year without color change and odor change. ◆ Oil cooler system adopts the SS304, which has the good heating exchange function, long life time. ◆ Environmental friendly, there is only 5-8% of the oil residual under the distilling kettle, which can be use as the boiler heavy fuel, so there is no pollution. ◆ The final oil is high purity; gasoline/diesel oil and lube base oil be loaded in different oil tanks. ◆ Machine design life is more than 20 years, long working life time. ◆ Easy operation, only 1 or 2 workers can operate the machine.

Boiler heating system for the oil recycling machine

Stainless steel tube for heating exchange and cooler

Product Parts Display

Oil Index After Treatment

Index	Unit	JZC-2	JZC-5	JZC -10	JZC -20
Capacity	Ton / day	2	5	10	20
Recovery ratio	%	Above 85%
Working pressure	MPa	≤ 0.4
Working vacuum	MPa	-0.08 ~ -0.0998
Working Temperature	℃	80-350
Working Noise	dB (A)	75
Power supply	V	380v, 50hz, 3Phase (Or According user demand)
Heating way		Electromagnetic-Heater or boiler ( fuel, natural gas or coal)
Pump Motor Power	kW	15	25	45	60
Working Size	M2	200	300	500	700
Recovery rate:
Final products	Ratio Percentages	Distillation temperature	Vacuum Value
Water	2%	80-110	-0.098
Gasoline and diesel	8%	120-210	500Pa
Light base oil	40%	220℃-290℃	300Pa
Heavy base oil (Viscosity ≥SN150 )	45%	300℃-350℃	200Pa
Oil Residual	5%
Total	100%

Packing & Delivery

Delivery Details： ◆Step 1.Test products with a high-precision tester by quality inspector ◆Step 2. Wrap film to ensure products waterproof and dust-proof ◆Step 3. Pack products in export standard wooden case ◆Step 4. Load products into the container with a forklift

Company Profile

Certifications

Why Choose Us

FAQ

Question1. Can you please offer sample? Answer: Sorry, our products are customized one-to-one according to customer needs, so samples cannot be provided. Q2. What is your packing method? A: Generally, our goods packed by wooden box. Q3. What is your terms of payment? A: Usually, we use T/T. Q4. How about your delivery time? A: Generally, it will take 5 to 10 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order. Q5. Can you customized goods for us? A: Yes, we can customized by your samples or technical drawings. Q6. If you have any inspection or test for your goods before delivery? A: Yes, we do the inspection and test before finished goods. Q7. Can we visit your factory? A: Yes, we warmly welcome your visiting, and can pick up you at airport or train station.