·         Zhuoji gem engraving automatic Angle grinding machine CNC computer numerical control five axis machine

·         Model  Number 810501338

·         The automaton is made up of 5 stepping motors. The functions of each motor are as follows:

·         Y1 motor function: responsible for the plate position (such as octagonal hand or manipulator)

·         Y2 motor function: responsible for the Angle or strength of downward sand beating

·         Y3 motor function: responsible for moving the head to the left or right, that is, when playing sand adjustment,

·         moves the nose to the disc side to work

·         Y4 motor function: responsible for lifting and lowering (such as the lifting platform of octagonal hand)

·         Function of Y5 motor: responsible for paddling sand and paddling distance

·         Input board position -- Y1 parameter (start input with y1 value on board 01)

·         Aligning stone -- Y1 parameter (overall aligning)

·         Increase and decrease height -- Y4 parameter (height)

·         Adjust the yaw Angle -- Y2 parameter (Y2 height from the disc)

·         Adjust the height again --y4 parameter (height)

·         Overall increase and decrease of strength -- Y2 parameter (overall increase and decrease of strength of Y2)

·         Polishing intensity -- Y2 parameter (note: Polishing intensity starts from 80)

·         Increase and decrease the strength of each plate separately -- parameter Y2 (start looking for the strength of the 1st plate)

·         Reverse (cross)

·         Y3 // Y5 mode: Positive and negative turn (row), dot sand (dot)

·         Stroke long, stroke short distance -- Y5 parameter (position of Y5 dial)

·         Fast, Slow speed -- Speed setting (Y5 speed)

·         Speed: speed setting (V2 low-speed speed), Y2 parameter (Y2 low-speed height)

·         Polishing parameter operation function

·         Y3 parameter (Y3 position: adjust 7000 or so)-- test Y4 parameter (Y4 height)-- test

·         Y2 parameter (y2 height from disk)-- adjust Y4 parameter (y4 overall rise and fall)-- adjust long and short distance

·         Y5 parameter (Y5 sliding distance) -- Increasing force Y2 parameter (overall increase or decrease of force y2)

·          

·          

·         The number of processing layers is seven layers, each layer has 16 plates

·          

·         Suitable for: corundum, spinel, ruby, turquoise, olivine, topaz/topaz, sapphire, tourmaline/tourmaline, garnet, agate, amber, tiger's eye, zircon, glass

·         Can process shape: round, oval, square, rectangle, triangle, pear, heart, water drop, horse eye shape, plum shape, star, leaf, axe shape, three-dimensional beads, three-dimensional water drop, three-dimensional triangle square ring face, egg ring face, pear ring face, bracelet, intermediate finger, flat bead, round bead and so on

·         Accessories: Diamond forming disc/polishing powder

·         Technical parameters:

·         Input Voltage /Voltage: /AC220V

·         Motor Power /Power: 250W

·         Rotational speed: 2800r/min

·         The biggest plate size is 8 inches

·         Dimension: length 560mm× width 800mm× height 1390mm

·         •

Jewelry and gem processing equipment series

1. Automatic processing equipment for gem cutting / cutting sheet

2. Automatic CNC processing equipment / tools for colored gemstones.

3. Automatic CNC processing equipment / tools for gem beads

4. Jade jade bracelet processing equipment / tools

5. Special shaped and heteromorphic processing equipment / tools

6. Gem glue injection and glue filling optimization processing equipment / tools

7. Vibrating barrel polishing processing equipment / abrasive

8. Drilling equipment / tools