IT-10 High precision negative ion detector

 

Product features and appearance:

 

IT-10 is a best measuring tool designed and developed by Shenzhen Desmond Technology Co., Ltd. and used to test the anion from such products as anion powder, tourmaline powder and various health products coatings. The tester can test the products of different traits including solids, liquids and powders. Based on American most advanced GM ion detection technology, the tester can precisely detect concentration of anion from 0 to 106anions/cm3. There are various measurement modes for option and its storage function may facilitate data view. It is the best auxiliary tool for research and development institutions, anion health product chains, performance evaluation of textile health products, research, development and sales of various anion products.

 

Test principle, purpose, innovation features and technical indexes of the product:

 

1. Using instructions:

 

(1) Please never touch induction part, or else, the failure caused by touch on detection induction part is not included in our guarantee scope.

 

(2) The anion generated from the nature is quite unstable and may cause different measurement results due to temperature, humidity, ultraviolet, electromagnetic wave, radioactive rays and other factors of the testing fields. 

 

(3) Please never place the tester in hot place or in the vehicle. The abnormal high temperature may result in internal circuit damage to cause incorrect testing.

 

(4) Please never test in water. The tester is not set with any waterproof device. If it falls in water, please immediately pick it up, remove battery and keep it dried in air. After complete dryness is confirmed, mount the battery in the tester for use. If there is any abnormal phenomenon, please deliver the tester to the manufacturer for repair in charge.

 

(5) The tester used or placed in strong electric field or in strong magnetic field may result in failure so that this situation must be avoided. The tester is not set with explosion-proof structure; thus, please never use it in the field where combustible gas may leak.

 

(6) If the test result is within 60, this value may be environmental value. Please make more tests. Then if the test result is still within 60, this value can be regarded as environmental background value.

 

Test principle of the product:

 

IT-10 is based on the most advanced GM ray energy detection technology and used to measure weak energy of radioactive rays from natural ores, ceramics, tourmaline, etc. Via long-term data experiment and accumulation, the energy of radioactive rays is converted into anion quantity by up-to-date computer technology. The extremely accurate measurement can be achieved by this method.

 

Specification:

Measurement mode	Model 1, Rapid measurement mode
	The detector measures for 10 seconds and then displays measurement value on LCD.
	Model 2, Standard measurement mode
	The detector measures for 20 seconds and then displays measurement value on LCD.
	Model 3, Accurate measurement mode
	The detector measures for 20 seconds for 8 times and then displays the average on LCD screen. It is mainly used to test low concentration and unstable anion products to obtain more accurate data.
Large screen LCD	It adopts 4 digits LCD to display. If 9999 is exceeded, X10 magnification will display.
Data storage	It can store 28 recent test data. Date stored automatically can be viewed on the display and data which exceeds 28 shall be overlain circularly.
Automatic shutdown function	Automatic shutdown functions of 15 minutes without operation to reduce energy consumption
Power supply	An universal 9V dry battery
Dimension	151X80X36mm
Weight	Approximately 0.35kg
Accessories	Portable sheath, Instructions and 9V battery
Service environment	-20°C-60°C, 5%-95%RH
Certification	CE (EMC1674)