While there are three basic types of tire valves: rubber snap-in, high-pressure snap-in and high-pressure metal clamp-in, it's the vehicle, required tire inflation pressures, driving conditions and wheel design that dictate which type of valve is appropriate for the application.

In order to complement wheel styling, valves can be fitted to the wheel in any position from horizontal to vertical. Nearly horizontal valve alignment is the most common and used by many wheel manufacturers to accept valve mounted tire pressure monitoring system transmitters. While tire valves will operate at any angle, valves mounted in a vertical axis used at high speeds are more likely to experience pressure loss due to centrifugal forces depressing the valve core and allowing air to escape.

The rubber components of valve stems can dry out and crack over time, causing air leaks or total air loss. To avoid this, we recommend replacing your valve stems at least every time you replace your tires.

For the package, we usually pick 100pcs per bag, 10bag per box. Use strong carton, waterproof, anti-collision function, ensure the quality and safety of goods.

 We are leading manufacture (over 10years'experence) of autoparts,including Tire valve(Tr 412/413/414 and V3 valves),wheel weights (Fe adhesive wheel weights,Zn adhesivewheel weights,pb adhesive wheel weights,clip on wheel weights).The tape (blue tape,USA 3M red tape,Norton tape),and clip on wheelweights (Fe,Zn,Pb).

We also product: