Palisade pales, the main components of palisade fencing, can be sold separately for repairing a damaged fence and cladding a palisade gates. Taking full advantages of forbidding appearance, the pales deter would be intruders and protect your house, office or factory, etc.

Pale Sections
Typically palisade pales are supplied with three types of vertical pale profile: angle iron, D section and W section style, which are engineered with inherent strength and high resistance to attempts of pry, impact, bending, dismantle installation and dislocation.

Posts and Rails
Panels are installed on rails in front of the posts, allowing for a finished appearance that is seamless for fence lines of any length. This configuration allows for fast installation - and means that exact post spacings are not a requirement!

Two types of assembly methods:
Our company can provide two types of palisade fence posts including RSJ post and square post. Generally, different post corresponds to different assembly methods. (See below pictures)

Gates
Choose from a wide range of gate styles, including pedestrian and drive Swing gates, as well as Slide and Cantilever gates.

1. Material: low carbon steel, stainless steel, hot rolled or cold rolled.

2. Fence length: 2.75mm

3. Fence height: 1.2m to 3.6m

4. RSJ post: 102 × 44mm for fences below 2.7mm, 127 × 66mm for fences above 2.7mm

5. Square post: 50mm × 50mm or 76mm × 76mm × 1.6mm thickness

6. Pales height: 1.2m to 3.6,

7. Pales thickness: 2mm to 5mm

8. Anti-rust surface treatments:

Tips:

Palisade fencing can be sold in loose form or complete panels in the length of 2.75m. So when ordering palisade fences, the total length will be a multiple of 2.75 meters. For example, if the length of your fence is 10 meters, you could order four palisade panels in the total length of 11 meters.

Don't forget to order additional posts, corner or end post clamps, fish plates to follow the different directions and complete your fences.

If you are wondering higher safety security, fence posts with additional top holes are the best choice. Barbed wires and razor wires can be fixed to these holes for provide excellent deterrent to intruders.

very excellent corrosion resistance, moisture resistance, weather resistance and long-term surface self-cleaning ability, not combustion, tough film, strong adhesion.

High security, anti-climb profile

Tamper resistant fixings

Multi-directional triple spiked top

Optional colour choice

Can be integrated with electric fencing

Installation on level or sloping sites

*Commercial and Industrial Sites
*Utilities Sites
*HGV Parks
*Car and Caravan Storage
*Schools
*Security Storage Depots
*Airports
*Retail
*Warehousing

By using high-quality raw meterial low carbon steel, at the same time adopt the international advanced production technogoly hot dipped galvanization to BS729. Our products have the characteristic of smooth surface, excellent corrosion resistance, weather resistance and long used life.

The other small factory used the poor meterail, and zinc coating is less, so their products are easy to rust.

The pales is firmed with strap, wrap in plastic film, then put on the plate.
The rails and post as same as pales.
The bolts and nuts is put in woven bag.

Delivery date:

About 15-20 days after  receiveing the deposit.

1.Guangzhou Shengcheng Sieve Co.,Ltd was founded in 1990, after 20 years of market, has developed into an international wire mesh manufacturing enterprises at present.

2. There have strict inspection in our company to control the quality.

3. We have streamline production to insure the competitive price, which can insure that you are competitive in your market.