Roll top fence, using a friendly round top and "trigonal" edges bottom to form a rigid fence. The surface treatment of Shengcheng roll top fence and double loop fencing is hot dipped galvanization or electric galvanization + polyester powder. The fittings of roll top fence and double loop fencing are round post or square post. We recommend these fence for park, school, playground, stadium etc. 

BRC fence specification:

Roll top fencing panel:

The panels consist of a unique and attractive, closed beam section located along the top and bottom edge of the panel. It is user friendly with no sharp or raw edges. These type of fencing panels are ideal where safety is a consideration. 

Roll top fencing post:

(1) Square post(mm): 40 x 40; 50 x 50; 60 x 60; 80 x 80;   thickness: 1.2mm, 1.5mm, 2.0mm, 2.5mm

(2) Roune post(mm): 38, 48, 60, 75;  thickness: 1.2mm, 1.5mm, 2.0mm, 2.5mm

(3) Peach post(mm): 50 x 70,  70 x 100;  thickness: 1.2mm

(4) I shape post(mm): 70 x 44;  thickness: 1.5mm

Post installation:

a.  be bury into ground

b.  with steel base

1 straighten & cut short the wire
2 welding
3 bending
4 galvanizing
5 parkerizing
6 powder/pvc coating
7 packing

1 cut short the tube
2 hole frilling
3 galvanizing
4 sandblasting
5 powder/pvc coating
6 rivet nuts installing
7 cups installing & packing

• Aesthetic appearance.

• High rigidity.

• Excellent through vision.

• Wide range of color options.

• Available as a complete system

Roll top fencing is extensively used for protection of airport, ports and harbors, for partition and protection of construction of cities, including gardens, lawn, zoos, pools and lakes, roads and uptowns, for protection and decoration of hotels, restaurants, supermarkets and so on.

Roll top fence Installation:

Roll top fence is also kind of easy installation production. Need to follow the normal installation process of metal fence products. We will give an example of the BRC fence installation based on 2.5m width.

1.Measure the roll top fence width of per set, calculate correctly if need to install all post together. Setting up the post into the holes on the ground every 2.5 linear meter. If the ground is concrete, we need to set up the post flange plate with M10 (min) anchor bolts into the concrete ground. During measure process, please make sure the line is straight or it is followed your plan. We can not change it after setting up the post.

2.Take the roll top fence panel out and stand up close to the fence panel. Need to make sure there is little space between the BRC fence panel and post. It should be touch or has very small space which will not affect setting up the V clips.

3.Setting up the V clips by vertical distance according to the punched holes on the post. Normally it is about 450mm or 600mm for per V clip. If the bolts are self drilling bolts, then we do not need any holes on post, just drill the bolts into the post wall accordingly.

4.Installing post rain cap on the top of the post in the end. If the height of roll top fence is too difficult for installing post cap, please set up the post cap first before set up the post. If the post cap is metal cap and already been welded on the post, then do not need to do any work on the post cap installation.

Guangzhou Shengcheng Sieve uses Fully automatic CNC welding equipment to manufacture our fence panel, which has stable welding spot and good tensile resistance. 

The small processing enterprises use Semi-automatic welding machine to make the fence panel, which has obvious welding spot and poor make.

1>There is rubber mat at the bottom of the pallet to avoid the pallet destroyed the panel

2>There is 4 metal corners to keep the pallet more strong

3>There is metal plate under the plastic bandage to a pressure for fence panel

4>There is wooden plate at the top of fence panel which can protect the fence panels avoid being crushed by other pallets.

Delivery date:

About 15-20 days after receiving the deposit.

1.Guangzhou Shengcheng Sieve Co.,Ltd was founded in 1990, after 20 years of market, has developed into an international wire mesh manufacturing enterprises at present.

2. There have strict inspection in our company to control the quality.

3. We have streamline production to insure the competitive price, which can insure that you are competitive in your market.