flood protection product,Gabion Wire Mattress

 Introduction of Gabion Mattress

    Maccaferri gabion Mattresses are made of double twisted hexagonal wire mesh and are used for permanent erosion control in channels,stream bank,spillways,river bank,and stable slopes from erosion or corrosion.The stone confinement within the units allows for higher shear stress resistance than riprap.made of PVC coated galvanized wire,gabion mattresses are divided into compartments and filled with stones at the project site.With lids colsed,the gabion mattresses from flexible,permeable,monolithic structures.Considerd a robust alternative to rip-rap,gabion mattresses offer long term performance against aggressive flow conditions and do not rely on vegetation for their hydraulic performance.The 100 ft (30m) long units make installation fast and cost effective.

   Mattresses are relatively small in height in relation to lateral dimension of a gabion and are generally used for channel linings.Ecomattresses are good for soil stability.

   The edges are reinforced with heavier gauge wire and the mattress is divided with internal partitions to form uniformly spaced cells,which is good for channel linings and bridge protection.

Material:1.low carbon steel wire

             2.zinc-5% aluminum alloy coated low carbon steel wire

             3.zinc-10% aluminum alloy coated

Specifications:1.wire gauge/diameter:2.0-4.0mm

                      2.Edge wire:0.5-1.0mm

                      3.aperture:60x80mm,80x100mm,80x120mm,100x120mm,120x150mm

                      4.Wire tension: not less than 38kg/m2,380N/mm

Standard sizes of Gabion Mattresses

Advantages of Maccaferri Gabion Mattresses :

1.improve the stability of riverbed and slides

tect riverbed from erosion and corrosion

3.good for the greening and ecological protection of riverbed and slopes

4.simple to build

Maccaferri Gabion Mattresses slope protection

slope angle:2h:1v or less

solution:Standard reno or gabion mattress slope protection

slope width:3"-36"

Minimum Soil Requirement of existing slope:

Required internal friction angle of soil minimum 26 degrees.

Installation of Gabion Mattresses :

1.put the gabion on flat ground 

2. unfold it and flatten creases

3. Uplift panel,rear panel,baseplate,bulkhead,to a box shape

nnect adjacent corners with double-stranded wire

Applications of Gabion Mattresses

About HAIAO

    HAIAO Wire Mesh Product Co.,ltd is a firm engaged in producing and exporting of gabion mattresses,gabion mats,a leading designer and manufacture in the industry in China.Founded in 1997,HAIAO has more than 10 years experience in this field,exporting excellent products all over the world,including USA,UK,Japan,India,Vietnam,Trinidad and Tobago.

 Looking forward to your contact and orders!