wholesale bulk cattle fence, pipe corral panels
Negotiable
Min.Order:1
Cattle panels fence is designed for the safe and effective flow of cattle in the lead up to the race, reducing stress on livestock by separating operator and beast.
Cattle panel can have different shapes, below are the popular shapes and specification on the market.
Panel type 1: oval rail with square vertical tube | ||
Height | 1.6m, 1.8m, etc. | |
Width | 2.07m, 2.09m, 2.9m, etc. | |
Horizontal oval rail | 30x60mm, 40x80mm, 42x115mm; 4pcs, 5pcs or 6pcs | |
Vertical square tube | 40x40mm, 50x50mm, 75x75mm, etc. 2pcs | |
Welded parts | U lugs, L lugs, caps, panel base | |
Accessary | pins | |
Material | hot dipped galvanized steel |
Panel type 2: rails and vertical are all square tubes | ||
Height | 1.8m | |
Width | 2.07m, 2.09m | |
Horizontal square rail | 40x40mm, 50x50mm 6pcs | |
Vertical square tube | 40x40mm, or 50x50mm 2pcs | |
Welded parts | U lugs, L lugs, caps, panel base | |
Accessary | Pins | |
Material | Hot dipped galvanized |
Panel type 3: rails and vertical are all round tubes | ||
Height | 1.8m | |
Width | 2.07m | |
Horizontal&Vertical tube | 42mm or 48mm O.D 6pcs | |
Welded parts | Lugs, caps and panel base | |
Accessary | pins | |
Material | hot dipped galvanized |
Panel type 4: round tubes with bent bottom base | ||
Height | 5ft, 6ft | |
Width | 9ft, 10ft, 12ft, etc. | |
Frame&rail round tube | 32mm or 42mm O.D | |
Welded parts | lugs, panel bent base | |
Accessary | chain lock, pins, etc. | |
Material | hot dipped galvanized or color coated |
As a professional livestock fence products manufacturer for over 10 years, we aware that if a farmer wants to run a cattle yard easily, only panels are not enough for them.
We did lots of market research, went abroad to visit our customers and listened to their advice& recommendations.
Today our livestock products covers a wide range, from cattle panel gate, man gate, sliding gate, hay feeder, rotary gate, loading ramp to cattle crush.
Find more livestock products details as following:
Cattle panel fence gate:
Height: 2.2m
Width: 2.1m
Frame tube:
50x50mm square tube or 42mm round tube
Lock: chain or spring lock
Color powder coated gate
Total height: 8ft
Width: 12ft, or 10ft
Round tube: 32mm or 42mm O.D
Lock: chain lock
Man gate:
Height: 2.2m
Width: 2.1m
Frame tube:
40x40mm or 50x50mm square tube
Lock: chain lock or spring lock
Sliding gate:
Height: 2.15m
Width: 0.75m
Frame tube:
50x50mm square tube
Horizontal tube:
oval - 40x80mm, 42x115mm
square - 40x50mm or 50x50mm
Race bow:
Height: 2.2m
Width: 0.75m
Frame tube:
40x40mm or 50x50mm square tube
Cattle loading ramp:
Total height: 3.2m
Length: 2.85m
Width: 0.75m
Vertical square tube: 60x60mm
Sidelong square tube: 40x40mm
Foot board: diamond plate
Galvanized sheet: 1.6mm thikness
Hay feeder:
Height: 1m
Diameter: 2m
Shape: round or oval shape
Bent square tube: 25x25mm
Bent round tube: 32mm O.D
3pcs make one set
Cattle crush:
Height: 2m
Length: 3.05m
Consist of cattle head bail, sliding gate, cattle panel and small gates.
1) Various livestock fence panel products, offer one-stop service for your cattle yard.
2) Long service life: more than 5 years
High quality raw material, strong welding and hot dipped galvanized surface, etc would make panels perfectly finished.
3) Both portable and permanent (panels buried under ground by cement) yard type are available.
4) We are not just manufacturer, but also solution provider.
Could design and check the panels and gates quantity you need according to cattle head.
* Make design for your farm yard according to the cattle head.
Panels or gates will be fully dried after silver spray painting on its surface.
Panels will be stacked on steel pallet first;
and then insert panels into rail space in order to load more quantity into container for exportation;
whole pallet will be fastened with steel or nylon belt finally
Panels will be carefully loaded into container by fork lift.
Some panels will be loaded in bulk on top and side of the container.
1. Portable: easy fast to handle (set up, remove and put down), makes the cattle panel fence very flexible.
2. Robust: interlocking system makes the fence very stable quality steel and fully welding makes the panel more stronger, heavy duty and anti-broken. high zinc or color coated make the fence durable.
3. Environment protecting: connection with welded to bracket lugs and joining pins, no need to dig holes or lay foundation. And it benefits grassland protection.
4. Livestock protection: no sharp edge, very smooth welding spot finished.
5. Cost-effective: give your corral years of service and minimal maintenance at a low initial cost.
* We keep in contact with our customers after they receive our panels.
Answer their questions during installation or application, also listen to their advice and suggestion towards our panels.
* Top panel quality and perfect after-sales service will help our customers as well as us to success in today's competitive fencing market.
* Below are panels and gates usage photos from our Australia, New Zealand, America, Canada and UK customers.
Any of your inquiry will be respond within 24 hours.
Contact us online or by email at any time.
Contact person: Jean
Mobile/Whatsapp/Skype/Wechat: +86 137 3110 6371
E-mail: jean (at)