Delta Anchor is one type of high holding power anchor.

Advantages : simple deconstruction, large grab weight ratio (generally 4-8, maximum up to 12) and good bottom grasping stability.

Disadvantages:  such as inconvenient anchoring operation and storage, easy to entangle anchor chain when the ship is turning, and easy to scratch the bottom of the ship by the warped anchor.

In order to facilitate transportation, we usually separate the anchor head and anchor shank for shipment. So we need our customer connect them by themselves after receiveing the anchors.

Step 1:Cutting   Step 2:Heating   Step 3:Bending

Step 4:Flash Butt Welding   Step 5:Trimming

Step 6:Shaping,stud setting    Step 7:Heat Treatment

Step 8:Tensile Testing    Step 9:Shot Blasting

Step 10:NDT   Step 11:Painting  Step 12:Delivery

1. Standard length is 27.5m per piece, we also can produce and cut anchor chains according to your requirement .
2. Material: alloy steel, generally including G30/G40/G60/G70/G80 , or according to your requirement
3. Grade : U2&U3 stud link anchor chains
4. Surface treatment: self color, black painted, zinc galvanized, hot dip galvanized or according to customer's requirement.
5. The tension breaking load conforms to National Standard.
6. Studlink/Studless anchor chains. Specification: 30-162mm, mainly adapt to vessels,marine.
7. CERTIFICATE: KR,ABS,LR,BV,NK,GL,DNV,RS,IRS,CCS;