RG：

Climate Simulation Chamber simulates the day and night light changes and climate conditions, to meet the multi-segment ladder programming controlled; can be a long-term culture experiment.

Suitable for biological tissue, cell culture, plant culture, small animals, and insects feeding to use.

Before starting the device for the first time, please follow the following procedures:

1. Open the outer door and the glass inner door and take out the shelves and accessories inside the equipment.

2. Wipe the inner wall of the cabinet with the gauze soaked in alcohol for disinfection, and then wipe off the alcohol with dry gauze.

3, according to their own experimental requirements to choose the shelf between the high and low position, and then put into the equipment shelf slot.

4. Put the water tank on the top of the equipment before use, and then connect the water pipe with the tap of the tank and the inlet of the left rear and lower side of the tank body (refer to the component drawing). Close the drain tap of the water tank and the box, insert the short spillway pipe at the opening of the box overflow pipe, and place the water tray under the outlet of the overflow pipe for use.

5. Fill the water tank with enough pure water.

Climate Simulation Chamber
/climatic-chamber/20170527/9.html