Retro-Reflective Infrared Photoelectric Switch for Translucent Object Detection
USD $12 - $13 /Set
Min.Order:10 Sets
Tianjin G-TEK Sensor Technology CO., Ltd
Infrared Mirror Reflector Photoelectric Switch for Rolling Shutters Door
IP67 Infrared PNP Retro-Reflective Photo Sensor for Swing Barrier
NPN Infrared Safety Beam Photo Sensor Manufacturer with CE Approved
IP67 NPN Infrared Retro-Reflective Photoelectric Sensor Mill with CE Certificate
PNP Infrared Bgs Cylinder Type Photoelectric Sensor for Swing Barrier
Background Suppression Type Diffuse Reflection Photo Sensor for Optical Turnstile
Product Parameters | |
Photoelectric sensor | PM18R |
Detection type | Retro-reflective type |
Detection object | Translucent、opaque objects |
Detection distance | 0.1~3.5m (RP05) |
Supply voltage | 10-30v DC |
No-load current | Max.25MA |
Response time | Max.5ms |
Light | Infrared LED(Wave length:660nm) |
Action mode | Selecting Light On/Dark On on product model basis |
Control output | NPN open collector,Load voltage: Max.30VDC, Load current: Max.150mA,Voltage drop: Max.0.7VDC; |
PNP open collector,Output voltage: supply voltage-0.7V, Load current: Max.150mA; | |
Indicator | Power indicator: Green;Action indicator: Red |
Protection circuit | Over-voltage、Short-circuit、Reverse polarity protection |
Ambient brightness | Sunlight: Max.11000lux Fluorescent: Max.3000lux |
Ambient temperature | -20℃~60℃ (No-freezing),Storage: -25℃~70℃ |
Ambient humidity | 0~90%RH |
Housing material | Housing: Cu plated Ni plated Cr Lens: PMMA |
Shape and size | As dimension |
Cable | Φ5,3×0.2mm² |
Protection rating | IP67 (IEC) |
Accessory | Screw , reflector (mirror) |
The detection distance is the range between the sensor and mirror and is measured
on Rp05 mirror basis.
Model | ||
Installation | Product Model | Detection Distance |
Retro—reflective type | PM18R-2ND | 0.1-3.5m |
PM18R-2NL | 0.1-3.5m | |
PM18R-2PD | 0.1-3.5m | |
PM18R-2PL | 0.1-3.5m |