customize the Impact Resistant Aluminium Pivot Door (revolving door).

We are the 1st door window professional manufacturer verified by "China Suppliers".

Don't click "Chat Now". It can not reach us. Negotiate by the email:

xiao18316573143@163.com

Mobile phone (wechat)：86-131 3822 8769    

Finish: powder coating, elecplating, etc.

Various glasses are optional.

pivot door (revolving door) is a kind of door classified according to the opening mode of the door. The door with spring hinge will close automatically after opening. The most common pivot door (revolving door) is the floor pivot door (revolving door), which is mostly used in public places and emergency exits.

Principle of floor pivot door (revolving door): floor spring is a hydraulic door closer, but the device that compresses the spring is a worm gear rather than a rack and pinion. Because the worm gear can rotate forward and reverse, the ground spring can be used for two-way doors, while the door closer can only be used for one-way doors. The technical key of the ground spring is the bearing seat at the lower part of the main shaft, which determines the bearing grade of the ground spring.

Extended data:

Composition of floor pivot door (revolving door):

1. pivot door (revolving door) track: made of high-strength and wear-resistant aluminum. It can be cut simply, and can be adjusted on site and installed with appropriate size even in stores and other places with various opening widths. The unit length is based on 2.5m.

2. pivot door (revolving door) controller: pull the detection signal of sensor or other signal switch, drive the motor and control the door body to move in an appropriate way.