Acrel AEW100-D36X wireless energy meter Lora power meter RS485 modbus with 3 split core current transformer
Negotiable
Min.Order:1
Acrel AEW100-D20X wireless energy meter Lora 470NHZ within 1km remote control
Harmonic Analyzers AC Multifunction Harmonic Digital Panel Meter PZ96L-E3H
3 phase digital din rail energy meter ADL3000-E/CT 100a input with three split core transformers
ANSI approved Revenue Meter AGF-AE-D100 two phase energy meter for solar monitoring system
Product Description
ADL rail- installation Electricity meters is a new generation electricity meter developed by Acrel Co,.Ltd, resulting from many years experience in designing Electricity meters. LCD display and electricity pulse output function is installed in the power meter; clock, rate period parameters can be set also. Data swap with the super ordination machine via RS485 communication interface greatly facilitate the power automated administration. This power meter has advantages of smaller volume, high precision, good EMC, easy installation etc, meet the related technical requirements of electronic power meter in the IEC 62053-21,IEC 62053-22 standard.
Product specification
Note:
1. Type D15 do not adapt the function of temperature measurement;
2. There is a mobile antenna lay outside can be chosen, and the length of wire is 2 meters.
Main function
Function | Function description |
Energy metering | Active kWh (positive and negative) |
Electrical measurement | U,I, P,Q,S,PF,F |
Pulse output | Active pulse output |
LED display | (L1,L2,L3)powered display, pulse, communication, wireless status |
Communication | Wireless transmission on 470MHz |
Infrared communication | |
Communication interface: RS485 |
Electrical performance
Voltage input | Rated voltage | 3×220/380V |
Reference frequency | 50Hz | |
Consumption | <2VA(Each phase) | |
Current input | Input current | 3×1.5(6)A,3×20(100)A, 3×40(200)A,3×80(400)A,3×120(600)A |
Start current | 1‰Ib(1.5(6)A) ,4‰Ib | |
Consumption | <2VA (In maximum current circumstance) | |
Measurement performance | Standard | CE, GB/T17215.321-2008,GB/T17215.322-2008 |
Active energy accuracy | 1 Class, 0.5S Class(using AKH-0.66/K-15) | |
Temperature accuracy | ±2℃ | |
Pulse | Width of pulse | 80±20ms |
Pulse constant | 6400imp/kWh ,400imp/kWh,200imp/kWh,100imp/kWh,60imp/kWh | |
Communication | Wireless | Transmission on 470MHz and maximum distance in open space is 1km |
Infrared communication | The constant baud rate is 1200 | |
Interface | RS485(A+,B-) | |
Connection mode | Shielded twisted pair conductors | |
Protocol | MODBUS-RTU |
Work environment
Temperature range | Operating temperature | -20℃~60℃ |
Storage temperature | -30℃~70℃ | |
Humidity | ≤95%(No condensation) | |
Altitude | <2000m |
Dimension and installing description
Metering module | L×W×H | 88mm×54mm×50mm | / |
AKH-0.66/K-15 Mutual inductor | 41mm×35mm×29mm | Secondary terminal wire length 1500mm | |
AKH-0.66/K-20 Mutual inductor | 90mm×57mm×35mm | Secondary terminal wire length 350mm | |
AKH-0.66/K-36 Mutual inductor | 109mm×71mm×35mm | Secondary terminal wire length 500mm |
Fig 1 Dimension of AEW100
Fig 2 Dimension of mutual inductor AKH-0.66/K-15
Fig 3 Dimension of mutual inductor AKH-0.66/K-20
Fig 4 Dimension of mutual inductor AKH-0.66/K-36
Installing description
Wiring description
1 The mutual inductor adapts the specification of AKH-0.66/K-20 and AKH-0.66/K-36.
L1, L2, L3 prick in to A, B, C phase respectively, and especially the A phase and N terminal powered for the AEW100. And A, B, C phase transmits the voltage and current to AEW100 by mutual inductor, and
then the AEW100 transmits the single to PC via RS485.
2 The mutual inductor adapts the specification of AKH-0.66/K-10 and AKH-0.66/K-15.
Company Profile
Acrel Co., Ltd. [Stock Code: 300286.SZ] is one of the few leading companies in China who provides various systematic solutions of power monitoring, power control, energy management and electrical safety for smart grid users.
Since June 2003, we has always been focused on the research, production and sales of intelligent electric meters. We concentrates on providing products and services to help customers improve electricity efficiency and safety. So far we had the following comprehensive solutions for different applications: 35(10)/0.4kV substation automation system, building mounted photovoltaic (BMPV) system, power quality management system, energy management system, electrical fire monitoring system, IT distribution system for medical locations, precise distribution management system, power supply monitoring system for fire protection equipment, fire emergency lighting and evacuate indicating system, fire resistant doorsets monitoring system, smart lighting control system, Lithium battery management system and electric vehicle charging system.
Certificate
Production Process
Packing&Shipping
Packing
Shipping