PCB Board Assembly Line SMT Reflow solder machine With Factory Price
USD $5000 - $8500 /Set
Min.Order:1 Set
Shenzhen JAGUAR Automation Equipment Co.,Ltd
PC control led driver making machine THT wave soldering machine
CE Certification Lead Free SMT Machine/Wave Soldering Machine
Low Cost SMT reflow soldering Nitrogen Smt Reflow Oven With Good Quality
High End Nitroggen Reflow Soldering Machine Lead Free SMT Reflow Oven
High Precision Mini DIP Wave Solder Equipment for Electronic Component Assembly Line
JAGUAR A4 Lead Free Small Reflow Oven for LED Bulb Soldering
JAGUAR 6 zones Reflow Oven with PC and Rail M6
Introduction:
No.1 The unique advanced long life heating system
1.The heating system adopt the Swedish nickel heater with efficiency and energy-saving. The peak wave length of the radiation power is 4UM with curved surface reflector enhance temperature ramp up speed, improve the thermal efficiency. And the special forced-air circulation system make PCB and the component uniformly heated and eliminate the "shadow effect" efficiently.
2.Using special high temperature resistant protection material in heating preservation structure and cast iron in heating passage.
3. Using imported Taiwan SanYue long shaft high temperature blower motor and W shaped heat duct, critical design for no noise or vibration and convenient for maintenance .
4. Heating zones are structured with porous aluminum air director, hot air is uniformly distributed to the PCB surface. Hood can open completely so as to easily proceed maintenance.
No.2 Stable and reliable conveyor system
1. The conveyor driving system use STK adjustable speed motor imported from Taiwan matched with the 1:150 turbine reducer can running extremely stable, speed range can varies between 0-1500mm/min.
2. Independent roller structure support and mesh belt running smooth and the speed precision is up to ±20 mm/min .
3. Mesh belt: durable and wear-resistant, not easy to deform and long life.
No.3 Stable and reliable electrical control system
1. It adopts imported thermostat control which owns fuzzy logic and PID closed loop control system. It can quick response to the changes in heating condition and ensure efficient heat compensation to achieve required temperature.
2. Using thermocouple imported from Taiwan to every heating zone, it can rapid feedback changes in each temperature zone, real-time monitoring to maintain the temperature in each zone.
3 .Special SSR solid state relay matched with dedicated heat dissipating block prolong the lifetime effectively. No contact output and fuzzy control function by thermostat, can monitoring the changes of environmental temperature and calorific value, applying the heating device by minimum pulse, ensuring the high precision of the temperature control & uniform temperature within zones. The zone length, flow direction, temperature distribution, all these are meet with IPC standards.
4. Powerful heating elements, heat up fast, it’s only need approx. 20 minutes from room temperature to set-point temperature.
5 .Failure diagnosis, visual & audio alarm.
6. Delay shutdown production function, uniform cooling after the shutdown: prevent hard-wares from any thermal damaged.
Specification:
Model | JAGUAR M6 | |
Heating System | Number of Heating Zone | Top 6 Bottom 6 |
Heating Passage | 2500mm | |
Heating Style | Hot Air | |
Number of Cooling Zone | Up 1 Bottom 1 | |
Cooling Style | Forced Cooling air | |
Conveyor System | Max. Width of PCB | 320mm |
Mesh belt width | 400mm | |
Conveyor Direction | L→R(or R→L) | |
Process Height | 900±20mm | |
Conveyor Type | Mesh and Chain | |
Conveyor Speed | 0-1500mm/min | |
Manual Lubrication | Standard | |
Hood Opening | Electrical Screw Pole | |
Fixed Track | Front Track Fixed (Option: Rear Rail Fixed) | |
Product Clearance | Top and Bottom 25mm | |
Control System | Power Supply | 5line 3phase 380V 50/60Hz |
Total Power Consumption | 26kw | |
Startup Consumption | 18kw | |
Steady Consumption | 4-7KW | |
Ramp Up Time | About 20 mins | |
Temp. Setting Range | Room Temperature-300℃ | |
Temp. Control Method | PLC + PC | |
Temp. Control Precision | ±2℃ | |
Data Storage | Process Data and Status Storage(80GB) | |
Nozzle Plate | Aluminum Alloy Plate | |
Abnormal Alarm | Abnormal Temperature. (Overtemp/Low temp.) | |
Board Dropped Alarm | Tower Light: Amber-warming, Green-normal, Red-abnormal | |
General | Dimension(L*W*H) | 3600×1100×1490mm |
Weight | 900KG | |
Color | Computer Grey |
Company Profile
Shenzhen Jaguar Automation is professional in manufacturing wave soldering machine and reflow oven,besides both two kinds of products, we also engaged in offering SMT conveyor, pick and place machine, LED equipments, PCB loader and unloader, screen printer and other SMT machines.Our services, we devote to serve customers and meet all of their diversified requirments with stable technical level, innovative design concept, precise manufacturing process, reasonable price and customer first after-sales system.JAGUAR has been committed to develop to lead-free machine and manufacture lead-free electronic devices since foundation. At present, we have researched and developed 4 sorts of environmental friendly reflow oven, there are A series, M series, F series and R series. What's more, we have also develop wave soldering machine, for example, the econimic wave solder, top lead free wave solder and high-end of large size wave solder. All of our machines are not only used wildly in electronic circuit, LED industry, instruments and apparatuses, but also in household appliances, such as washing machine, microwave, television ect.
Exhibition and Certificate
Why Choose Us?
Contact information
Tina (Sales manager)
Mobile/Whatsapp/Wechat/Skype: 86-13543252590
E-mail: service@jaguar-ele.com